Conductivity

Manufacturer number: HI98303Scope of delivery:CR2032 battery (one piece)protective capinstruction manualQuality certificate1413 µS/cm calibration solution 20ml, four bags

Manufacturer number: HI98304Scope of delivery:CR2032 battery (one piece)protective capinstruction manualQuality certificate12.88 mS/cm calibration solution 20ml, four bags

Mobile Analysis Laboratory for Ion Measurements – Versatile Use Compact kit for simultaneous determination of multiple water and environmental parameters The Horiba 4M LAQUAtwin Kit is a mobile laboratory that allows you to determine important ion parameters directly on-site. The case contains pocket testers for measuring sodium, potassium, nitrate, and calcium, as well as for temperature measurement. Each device uses ion-selective electrodes for targeted analysis of small samples and provides fast, reliable results. In addition to the four measurement devices, the kit includes calibration solutions and a wash/spray bottle for sensor cleaning. The sensors can be stored dry without special storage solutions. Compact Multi-Parameter Kit for Flexible On-Site Analyses The set is designed for measurement tasks where multiple ions need to be detected simultaneously, for example when monitoring drinking and process water, performing environmental checks of water bodies, conducting aquaculture analyses, or agricultural research. Thanks to the case, all essential testers including accessories are always on hand and ready for immediate use. The measurement results are available in a short time and are reliable and reproducible – ideal for routine and control measurements in the field. All components are neatly arranged in the case and ready for use at any time. An additional advantage is that the sensors can be stored dry without special storage solutions. Due to its compact design, the kit is particularly suitable for mobile applications where multiple ion parameters need to be determined quickly one after the other or in parallel. Why Multi-Parameter Ion Measurements Are Useful – and a Mobile Kit Is Ideal In many applications, not just a single measurement is important, but the interaction of multiple ion parameters. Sodium, potassium, nitrate, and calcium together influence water quality, biological processes, plant growth, and technical operations. Single measurements in a laboratory are often time-consuming and inflexible. A mobile analysis kit allows simultaneous detection of multiple parameters directly on-site. This allows relationships to be recognized more quickly, decisions to be made more reliably, and measurement campaigns to be carried out more efficiently. The Horiba 4M LAQUAtwin Kit combines these advantages in a compact, user-friendly system. Additional information We would like to inform you of an upcoming product update for the LAQUAtwin handheld analysers. To enhance product safety and prevent infants and young children from accidentally swallowing the batteries, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for enhanced safety. Reason: To prevent accidental swallowing of batteries. Production date: From January 2026 in Japan Deliveries to EMEA distribution partners: From March 2026 As this change is currently being rolled out, mixed deliveries of the current and updated versions may occur during the transition period. Frequently asked questions How long is the warranty period for HORIBA pocket testers? The warranty period is two years from delivery for commercial customers. How many measurements can be taken before the sensor needs to be replaced? This varies depending on the application, use and storage of the Horiba tester. As a rule, the sensor should be replaced after one year. How long is the warranty period for replacement sensors for pocket testers? The warranty period is 12 months after delivery for commercial customers. How do you clean the pocket tester? The pocket tester can be rinsed under water. We recommend cleaning with DI water (deionised). Tissue paper is recommended for drying after cleaning. How can the pocket tester be reset to factory settings? (e.g. in the event of an incorrect measurement result) This information can be found in the operating instructions. These can be found in the download area of the shop and on the product. Is calibration necessary before each measurement? Basically, yes. Further information can be found in the operating instructions.

Stainless made Conductivity cell is now available!This conductivity cell is tough to shock and the best choise to measure Organic Solvent as well as Ultra pure water sample by employing the stainless material for its body. Low conductivity measurements (0.01~500 µS/cm) with BNC connector.This cell can be connected with the meters which equip BNC connector e.g. 200/F-70/1500/2000 series.Flow cell is available. Manufacturer article number: 3200878882 (9371-10D)

Multifunctional Dual-Channel Laboratory Meter for pH, Redox, Ion-Selective Parameters, and More Professional Horiba F-74 Laboratory Device for Simultaneous Analysis of Multiple Water and Ion Parameters The Horiba F-74 dual-channel laboratory device combines a wide range of analytical measurement methods for various parameters in a powerful system. It measures pH, redox, temperature, conductivity, resistance, salinity, TDS, and ion-selective parameters. The device operates with two independent channels: The first channel is designed for measuring pH, ion-selective parameters, mV, and redox potential. The second channel can measure conductivity, salinity, resistance, and TDS. Automatic buffer and calibration solutions, visual stability indicators, and integrated electrode status ensure reliable and repeatable results. This channel separation allows different parameters to be measured efficiently and simultaneously, supporting safe and convenient operation in the laboratory. Powerful Dual-Channel System for Precise Laboratory Analysis The Horiba F-74 is designed for laboratory environments where measurement accuracy, documentation, and process safety are crucial. Simultaneous recording of multiple parameters saves time and increases the analytical value, especially for complex samples. Its intuitive operation makes the device suitable for both routine analyses and demanding measurement tasks in research, quality control, and industry. Technical Highlights and Key Advantages of the Horiba F-74 Dual-Channel Laboratory Device The laboratory meter offers numerous features that simplify daily use and support compliance with standards: Touchscreen color display for intuitive control and clear visualization Automatic buffer and calibration recognition for reliable results GLP/GMP compliance for regulated applications Data storage and PC communication for easy archiving and analysis The combination of measurement versatility, user-friendliness, and high precision makes the Horiba F-74 an ideal solution for professional multi-parameter laboratory analyses. Frequently asked questions How long is the warranty period for HORIBA analysers? The warranty period is 2 years for the 300 (WQ) series and 1 year for the F series after delivery. Where can I find suitable replacement electrodes or buffer solutions? You can find the appropriate replacement electrodes and buffer solutions in the shop under the main item at the bottom of the cross-selling section. How do I clean the probe before calibration? The sensors should be cleaned with DI water (deionised). After cleaning, wipe them with tissue paper if possible.

Stress-free measurement - professional model Water quality analysis is repeatedly performed in laboratories on a daily basis. Our high-end benchtop model was developed to provide simplicity with excellent on-site usability - from operation and maintenance through to troubleshooting.Ideal for student training and routine applications. Good value for money: no bells and whistles that sounds good but is rarely used. From a renowned manufacturer whose company started with pH meters as early as 1945.Highly accurate measurements  Accepts up to 5 conductivity calibration points Automatic calibration at 84μS/cm, 1413μS/cm, 12.88mS/cm, & 111.8mS/cm standards Displays average calibration factor Selectable cell constant Allows 1-point salinity calibration and temperature calibration Pre-programmed TDS and salinity curves for various applicationsScope of delivery: Measuring device with integrated electrode stand Universal mains adapter with 6 plugs Operating instructions Starter set version additionally contains: 9382-10D plastic body conductivity electrode, cell constant k=1.0 84 µS/cm, 1413 µS/cm, 12.88 mS/cm conductivity standard (1 x 250ml each) with electrode holder Manufacturer article number:1300095721 (EC1500-S)

High-end laboratory measuring instrument for analytics  Dear customers, herewith we offer you our highly professional Horiba laboratory table-top measuring instrument of the 2000 series.  The LAQUA 2000 series laboratory tabletop meter has a very high-quality 5 inch display with backlighting which shows you all the important information, such as the measured value with up to three decimal places (depending on the resolution), the temperature, the date with time and much more.  The LAQUA 2000 series also offers you an adequate device memory with automatic data storage after a set time interval to document your daily measurements accurately over a long period of time. To protect the device settings from unauthorised access, they are password-protected. After your measurements, you can easily transfer all measurement data from the device to your PC via a USB cable in CSV, Excel and Pdf formats using the DAS20 software.  In order to facilitate your daily work with the device, the table measuring device visualises the correct calibration, the stable measurement as well as the electrode wear condition. The operation is intuitive because the available keys are marked with symbols and abbreviations. After the analysis, you can clean the device easily and in a time-saving manner with a damp cloth, as the surface is dirt-repellent due to its nature. With the electrode stand included in the scope of delivery, two electrodes can be held and adjusted in height. This allows you to individually align your electrode to your container or glass for calibration and measurement. Special features of the Laqua EC2000 model (multi-parameter): The EC2000 is a measuring instrument which evaluates the conductivity in various measuring ranges and also measures the TDS, resistance, salinity and temperature values. Conductivity-resistivity-TDS-salinity wide measuring range from 0.001μS/cm to 2,000 S/cm  allows automatic and manual conductivity calibrations  records individual and average calibration factors after conductivity calibration  Calculates resistance, TDS and salinity based on measured conductivity  7 conductivity ranges:   0.000 to 1.999 μS/cm (k = 0.1)  2.00 to 19.99 μS/cm (k = 0.1, 1)  20.0 to 199.9 μS/cm (k = 0.1, 1, 10)  200 to 1999 μS/cm (k = 0.1, 1, 10)  2.00 to 19.99 mS/cm (k = 0.1, 1, 10)  20.0 to 199.9 mS/cm (k = 1, 10)  0.200 to 2.000 S/cm (k = 10) Below we would like to show you in full the general functions of the Horiba LAQUA 2000 series: internal memory for up to 2000 data sets, measurement data with time and date information records and stores data in the unit memory based on a specified time interval a 4-digit password protects the meter set-up mode from unauthorised access data can be transferred to a computer and exported in the following formats CSV/Excel/PDF GLP/GMP  compliance of the instrument as data can be displayed, recorded and printed with date and time stamp on the instrument Software updates can be downloaded to the instrument Calibration reminder function, indicates that it is time to calibrate (alarm adjustable up to 90 days) Electrode holder is mounted on the meter and can hold up to 2 electrodes (rotates 360º and can be moved up and down 30cm) Displays measurement stability in measurement and calibration mode displays electrode condition based on calibration data smooth surface, easy cleaning RS-232/USB, therefore easy PC and printer connection and free instrument software Ergonomic design for easy viewing and operation Clearly labelled and easy-to-use ports for communication and measurement 5" digital display with backlight, shows all important measurement values and status Automatic calibration, recognises a wide range of standard solutionsadjustable switch-off time (up to 30 minutes) temperature compensation, the temperature in °C or °F is either automatically detected if a temperature sensor is connected (ATC mode) or manually entered by the user several measuring modes: Auto-Stable mode signals a stable measured value,Auto-Hold mode holds a stable measured valueReal Time mode continuously displays current readings small meter footprint of 155 x 150 mm, saves valuable space Temperature detection, easy display of sample temperature user selectable resolution, up to 3 digits Fixed and individual calibration pointsEasy navigation, navigate through the settings menu by up, down, right and left Scope of delivery: Measuring device with integrated electrode stand Universal mains adapter with 6 plugs Operating instructions Starter set version additionally contains 9382-10D conductivity electrode with plastic body, cell constant k=1.0 84 µS/cm, 1413 µS/cm, 12.88 mS/cm (1 x 250ml each) Flow cell available in combination with 9371-10 stainless steel conductivity cell for ultrapure water measurement (300-2C-C) Manufacturer part number:Meter only   EC2000 (3200896965) Starter-set   EC2000-S (1300098881)

Stress-free measurement - professional model Water quality analysis is repeatedly performed in laboratories on a daily basis. Our multiparameter laboratory measuring instrument was developed to provide simplicity with excellent on-site usability - from operation and maintenance through to troubleshooting. Simultaneous measurement is possible by connecting two electrodes at the same time.Ideal for student training and routine applications. Good value for money: no bells and whistles that sounds good but is rarely used. From a renowned manufacturer whose company started with pH meters as early as 1945.Highly accurate measurements Automatic temperature compensation Accepts up to 6 pH- and up to 5 conductivity- calibration points Auto calibrates USA, NIST, & DIN pH buffers Displays offset & average slope Allows 1-point ORP-, salinity- and temperature- calibrationScope of delivery: Measuring device with integrated electrode stand Universal mains adapter with 6 plugs Operating instructions Starter set version additionally contains: 9625-10D refillable pH electrode with plastic body 9382-10D plastic body conductivity electrode, cell constant k=1.0 pH 4, 7 and 10 buffer solutions & 3.33M KCl (1 x 250ml each)84 µS/cm, 1413 µS/cm, 12.88 mS/cm conductivity standard (1 x 250ml each)with electrode holder Manufacturer article number:1300095722 (PC1500-SR)

High-end laboratory measuring instrument for analytics  Dear customers, herewith we offer you our highly professional Horiba laboratory table-top measuring instrument of the 2000 series.  The LAQUA 2000 series laboratory tabletop meter has a very high-quality 5 inch display with backlighting which shows you all the important information, such as the measured value with up to three decimal places (depending on the resolution), the temperature, the date with time and much more.  The LAQUA 2000 series also offers you an adequate device memory with automatic data storage after a set time interval to document your daily measurements accurately over a long period of time. To protect the device settings from unauthorised access, they are password-protected. After your measurements, you can easily transfer all measurement data from the device to your PC via a USB cable in CSV, Excel and Pdf formats using the DAS20 software.  In order to facilitate your daily work with the device, the table measuring device visualises the correct calibration, the stable measurement as well as the electrode wear condition. The operation is intuitive because the available keys are marked with symbols and abbreviations. After the analysis, you can clean the device easily and in a time-saving manner with a damp cloth, as the surface is dirt-repellent due to its nature. The electrode stand included in the starter set can be used to hold two electrodes and adjust their height. This allows you to individually align your electrode to your container or glass for calibration and measurement. Special features of the Laqua PC2000 model (multi-parameter): The PC2000 is a combination of the ION2000 and the EC2000 with the advantage that you can measure all parameters with one device. Dual input, connection of 2 electrodes at the same time. pH-ORP wide measuring range; -2.000 to 20.000 pH  high accuracy; ± 0.003 pH  resolution: 0.1, 0.01 or 0.001 pH  continuous display of calibrated points  display of offset and slope - by segment and average up to 5 pH  calibration points ± 2000.0 mV  1-point redox calibration  automatically recognises and calibrates USA, NIST, NIST2 and DIN pH buffers  allows CUST (Custom) buffers for manual calibration  Conductivity-resistivity-TDS-salinity wide measuring range from 0.001μS/cm to 2,000 S/cm  allows automatic and manual conductivity calibrations  records individual and average calibration factors after conductivity calibration  Calculates resistance, TDS and salinity based on measured conductivity  7 conductivity ranges:   0.000 to 1.999 μS/cm (k = 0.1)  2.00 to 19.99 μS/cm (k = 0.1, 1)  20.0 to 199.9 μS/cm (k = 0.1, 1, 10)  200 to 1999 μS/cm (k = 0.1, 1, 10)  2.00 to 19.99 mS/cm (k = 0.1, 1, 10)  20.0 to 199.9 mS/cm (k = 1, 10)  0.200 to 2.000 S/cm (k = 10) Ions (ammonia, calcium, chloride, fluoride, nitrate, potassium)  Measurement ion-selective accepts combined and half-cell ion-selective electrodes wide measuring range from 0.000 μg/L to 9999 g/L accepts up to 5 user-defined ion calibration points choice of preferred units: μg/L - mg/L - g/L, ppm - ppt, mmol/L - mol/L Resolution of 4 significant digits after the decimal point with automatic scaling  Below we would like to show you in full the general functions of the Horiba LAQUA 2000 series: internal memory for up to 2000 data sets, measurement data with time and date information records and stores data in the unit memory based on a specified time interval a 4-digit password protects the meter set-up mode from unauthorised access data can be transferred to a computer and exported in the following formats CSV/Excel/PDF GLP/GMP  compliance of the instrument as data can be displayed, recorded and printed with date and time stamp on the instrument Software updates can be downloaded to the instrument Calibration reminder function, indicates that it is time to calibrate (alarm adjustable up to 90 days) Electrode holder is mounted on the meter and can hold up to 2 electrodes (rotates 360º and can be moved up and down 30cm). Electrode holder only included in the starter set.Displays measurement stability in measurement and calibration mode displays electrode condition based on calibration data smooth surface, easy cleaning RS-232/USB, therefore easy PC and printer connection and free instrument software Ergonomic design for easy viewing and operation Clearly labelled and easy-to-use ports for communication and measurement 5" digital display with backlight, shows all important measurement values and status Automatic calibration, recognises a wide range of standard solutionsadjustable switch-off time (up to 30 minutes) temperature compensation, the temperature in °C or °F is either automatically detected if a temperature sensor is connected (ATC mode) or manually entered by the user several measuring modes: Auto-Stable mode signals a stable measured value,Auto-Hold mode holds a stable measured valueReal Time mode continuously displays current readings small meter footprint of 155 x 150 mm, saves valuable space Temperature detection, easy display of sample temperature user selectable resolution, up to 3 digits Fixed and individual calibration pointsEasy navigation, navigate through the settings menu by up, down, right and left Scope of delivery: Measuring device with integrated electrode stand Universal mains adapter with 6 plugs Operating instructions Starter set version additionally contains 9625-10D refillable pH electrode with plastic body 9382-10D conductivity electrode with plastic body, cell constant k=1.0 pH 4, 7 and 10 buffer solutions & 3.33M KCl (1 x 250ml each) 84 µS/cm, 1413 µS/cm, 12.88 mS/cm (1 x 250ml each) with electrode holderFlow cell available in combination with 9371-10 stainless steel conductivity cell for ultrapure water measurement (300-2C-C) Manufacturer part number:Meter only   PC2000 (3200896964) Starter-set   PC2000-SR (1300098882)

Thank you for your interest in our smart and customizable Horiba WQ-300 series instruments.The high-quality digital multi-parameter handheld meters with their generous color LCD display with LED backlight (7 cm x 5.2 cm) are ideally suited for use in the field under all conditions and in direct daylight.Use our configurator to freely select the suitable measuring device of the WQ-300 Horiba series (1 to 3 channels), the measuring parameters (sensor cartridges) and desired cable length (with integrated sensor receptacle + digital module) according to your wishes and requirements. At a later stage, you can always connect another available measurement parameter to the device via the corresponding sensor cable or carry it in the case as a supplement. As with other handheld measuring devices from Horiba, a major advantage of these devices is that the measuring devices are highly resistant to shock, slipping and scratching thanks to a special rubber coating. Only four standard AA 2500 mAh batteries are required for operation, and to give you more flexibility when you are on the move, the WQ-300 series devices can also be powered by a powerbank or battery pack via the integrated USB interface. The IP67 certification, which certifies dustproofness and protection against temporary submersion for up to 30 minutes at a water depth of one meter, completes the overall professional package, along with the usual ergonomic design and ease of user operation.  Horiba attests to its outstanding product quality by offering a three-year warranty on the LAQUA WQ-300 series handheld meters. Other added values and features:During analyses, the user is supported by the display of operating instructions in the form of smiley icons, which is supplemented by an LED status display on the sensor. This is intended to prevent operating errors, which can lead to implausible measurement results. The design decision to install only a small number of control buttons and not to implement any nested user menus serves to ensure that the devices can be operated easily and safely even during discontinuous use as well as when used by other users.  The measuring instruments have an electrode wear indicator, a measuring stability indicator on the instrument and sensor, a locking function to "save" the currently measured value on the display, free naming of the measuring point (8 characters), automatic calibration functions, integrated sensor holders, self-diagnosis function, as well as GLP functions. The fold-out stand on the back of the instruments means that you always have your hands free to carry out your measurements easily and safely. Measurement data can be conveniently transferred to your computer or cell phone via USB or WiFi.All handheld meters of the 300 series are delivered in a reinforced measuring case for mobile use in the open air. This provides space for the meter, for electrodes and cables, for up to eight 60 ml bottles of buffer solutions including an integrated buffer solution bottle holder for easier calibration. Particularly noteworthy is the automatic sensor recognition of the instrument through the use of sensor cables with integrated digital sensor recording. Information about the sensor, calibration data as well as measurement settings are stored in the sensor recording and transmitted to the measuring instrument. In addition, calibration of all connected sensors is possible at the same time, since each sensor head independently stores the measurement and calibration data and transmits it to the WQ300 series measuring device.Optionally, there is the possibility to connect and use analog sensors via the Horiba BNC sensor adapter with the device, please contact us for this.Languages:GermanEnglishFrenchSpanishPortugueseChineseScope of delivery:WQ-300 series handheld meter in a carrying casethe digital electrode you have chosen, if applicable, and the corresponding sensor-specific cable with integrated digital sensor receptaclemanualManufacturer article number single measuring device WQ-310-K 1 channel: 3200832605 Note: Chloride sensor, if selected, is supplied without chloride ion strength regulator and chloride electrode filling solution. This must be procured by the customer. Without the filling solution the sensor can´t be used. Why We Use These Measuring Devices in Water Treatment Precise calcium control is a key element of efficient water treatment – from drinking water purification and process water management to environmental analysis. Elevated calcium levels can lead to scaling, pipe damage, energy losses, and disruptions in chemical processes. For this purpose, we offer tailored high-end solutions from the Horiba LAQUA WQ Series (WQ310-K, WQ320-K, WQ330-K) in our online shop, specifically designed to meet the needs of water technology:  WQ310-K: Single-parameter solution for targeted measurements • WQ320-K: Simultaneous monitoring of, for example, calcium and conductivity • WQ330-K: Three-channel measurement for complex real-time multi-parameter analyses Why We Rely on These Devices: • They provide reliable data for controlling and optimizing water treatment systems • They offer digital evaluation, documented results, and interfaces for process integration • They are robust, packaged in a practical analysis case, and thus also suitable for mobile on-site use • They allow calcium to be measured in combination with other parameters such as pH, conductivity, or redox – for a holistic and efficient approach

Thank you for your interest in our smart and customizable Horiba WQ-300 series instruments.The high-quality digital multi-parameter handheld meters with their generous color LCD display with LED backlight (7 cm x 5.2 cm) are ideally suited for use in the field under all conditions and in direct daylight.Use our configurator to freely select the suitable measuring device of the WQ-300 Horiba series (1 to 3 channels), the measuring parameters (sensor cartridges) and desired cable length (with integrated sensor receptacle + digital module) according to your wishes and requirements. At a later stage, you can always connect another available measurement parameter to the device via the corresponding sensor cable or carry it in the case as a supplement. As with other handheld measuring devices from Horiba, a major advantage of these devices is that the measuring devices are highly resistant to shock, slipping and scratching thanks to a special rubber coating. Only four standard AA 2500 mAh batteries are required for operation, and to give you more flexibility when you are on the move, the WQ-300 series devices can also be powered by a powerbank or battery pack via the integrated USB interface. The IP67 certification, which certifies dustproofness and protection against temporary submersion for up to 30 minutes at a water depth of one meter, completes the overall professional package, along with the usual ergonomic design and ease of user operation.  Horiba attests to its outstanding product quality by offering a three-year warranty on the LAQUA WQ-300 series handheld meters. Other added values and features:During analyses, the user is supported by the display of operating instructions in the form of smiley icons, which is supplemented by an LED status display on the sensor. This is intended to prevent operating errors, which can lead to implausible measurement results. The design decision to install only a small number of control buttons and not to implement any nested user menus serves to ensure that the devices can be operated easily and safely even during discontinuous use as well as when used by other users.  The measuring instruments have an electrode wear indicator, a measuring stability indicator on the instrument and sensor, a locking function to "save" the currently measured value on the display, free naming of the measuring point (8 characters), automatic calibration functions, integrated sensor holders, self-diagnosis function, as well as GLP functions. The fold-out stand on the back of the instruments means that you always have your hands free to carry out your measurements easily and safely. Measurement data can be conveniently transferred to your computer or cell phone via USB or WiFi.All handheld meters of the 300 series are delivered in a reinforced measuring case for mobile use in the open air. This provides space for the meter, for electrodes and cables, for up to eight 60 ml bottles of buffer solutions including an integrated buffer solution bottle holder for easier calibration. Particularly noteworthy is the automatic sensor recognition of the instrument through the use of sensor cables with integrated digital sensor recording. Information about the sensor, calibration data as well as measurement settings are stored in the sensor recording and transmitted to the measuring instrument. In addition, calibration of all connected sensors is possible at the same time, since each sensor head independently stores the measurement and calibration data and transmits it to the WQ300 series measuring device.Optionally, there is the possibility to connect and use analog sensors via the Horiba BNC sensor adapter with the device, please contact us for this.Languages:GermanEnglishFrenchSpanishPortugueseChineseScope of delivery:WQ-300 series handheld meter in a carrying casethe digital electrode you have chosen, if applicable, and the corresponding sensor-specific cable with integrated digital sensor receptaclemanualManufacturer article number single measuring device WQ-320-K 2 channel: 3200832606 Note: Chloride sensor, if selected, is supplied without chloride ion strength regulator and chloride electrode filling solution. This must be procured by the customer. Without the filling solution the sensor can´t be used.

Horiba WQ330-K – Your Professional 3-Channel Water Quality Meter Expandable multi-parameter system for simultaneous measurement of pH, conductivity, redox, and other water parameters The Horiba LAQUA WQ330-K is a powerful multi-channel device for advanced water analysis, both on-site and in the laboratory. With three freely configurable measurement channels, it can simultaneously record parameters such as pH, conductivity, redox potential, TDS, temperature, oxygen, ammonia, calcium, chloride, nitrate, fluoride, and potassium. Intuitive operation, automatic sensor recognition, and digital calibration ensure accurate, fast, and reproducible measurements. Flexible Multi-Parameter System for Field and Laboratory Applications The analysis kit with the Horiba WQ330-K is ideal for environmental and water body monitoring, research and teaching, as well as drinking and process water control. The large LCD display with LED backlight ensures excellent readability even in direct sunlight. Measurement data can be exported and documented via USB or wirelessly, greatly simplifying traceability and analysis. The modular system allows the device to be quickly and precisely adapted to any measurement task. It is ideal for users who need to efficiently and reliably monitor multiple water parameters. Technical Features and Key Advantages of the WQ330-K The three measurement channels of the Horiba WQ330-K enable simultaneous recording of different water parameters, reducing measurement time and allowing better evaluation of relationships between parameters. The modular sensor concept allows flexible use of digital sensors, which are automatically recognized and store their calibration history. Notably, the combination of high measurement precision, user-friendliness, and mobility makes this device stand out. Quick deployment without complicated setup, along with easy data transfer for documentation and analysis, makes the Horiba LAQUA WQ330-K an ideal solution for professional water analytics. Frequently asked questions How long is the warranty period for HORIBA analysers? The warranty period is 2 years for the 300 (WQ) series and 1 year for the F series after delivery. Where can I find suitable replacement electrodes or buffer solutions? You can find the appropriate replacement electrodes and buffer solutions in the shop under the main item at the bottom of the cross-selling section. How do I clean the probe before calibration? The sensors should be cleaned with DI water (deionised). After cleaning, wipe them with tissue paper if possible.

Find out more about the accuracy of HORIBA’s pocket conductivity testers: your ideal choice for precise conductivity measurements. The EC-11, EC-22 and EC-33 models, manufactured in Japan, represent the pinnacle of quality in pocket testers. They offer numerous benefits for users in laboratories, industry, aquaculture, water treatment, schools and universities, as well as amateur gardeners. An overview of the HORIBA Conductivity Pocket Tester series: Model EC-11: Water resistance, micro-sample analysis from 0.12 ml and a conductivity measurement range of up to 19.99 mS/cm are the key features of these instruments. They are straightforward to use and maintain, ensuring long-term reliability. Model EC-22: Offers a larger temperature display and a wider measurement range. Perfect for advanced applications where the temperature of the medium must be determined for detailed analysis. Model EC-33: With the widest measurement range, TDS measurement capability and advanced features, this model sets new standards. For professionals who need to carry out the most precise measurements under varying conditions. Applications and benefits for the user: ‘Immersion’: Direct measurement is possible in solutions. For example, you can immerse the tester in a beaker and determine the value. ‘Scoop’: The hinged lid, which acts as a scoop here, allows you to easily take a sample from a hard-to-reach area. ‘Drops’: Efficient analysis of the smallest volumes. Thanks to their user-friendliness, durability and ‘Made in Japan’ quality, HORIBA pocket conductivity testers are a reliable solution for a variety of measurement applications. Manufacturer’s item number: 3999960126 LAQUAtwin EC-22: The world’s first pocket-sized conductivity meter Your mobile laboratory – for on-site use: Ideal for water quality testing in aquariums, foodstuffs and many other applications. HORIBAs unique compact analyser integrates the electrode, display and sample chamber to enable simple, effective on-site testing through direct measurement using a single drop. Minimum sample volume: 0.12 ml Up to 3 calibration points Conductivity and temperature display Automatic range Automatic calibration Automatic standard recognition: 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm Automatic temperature compensation: 2%/°C fixed Temperature calibration: 5 to 40.0 °C Automatic stabilisation / automatic hold measurement Automatic switch-off: 30 mins Low battery indicator IP67 rating: dust and water resistant Replaceable sensor 400-hour battery life: continuous operation without backlight Materials: ABS-epoxy housing and titanium coating with platinum-black sensor Display: custom (monochrome) LCD with backlight Operating conditions: 5 to 40°C, 85% or less relative humidity Warranty: 2 years – meter, 6 months – sensor Packaged in a handy carrying case Supplied with 1413 µS/cm & 12.88 mS/cm conductivity standards (14 ml each), conditioning solution (4 ml), 2 x CR2032 batteries, dropper, instructions and quick start guide Additional information We would like to inform you of an upcoming product update for the LAQUAtwin pocket-sized analysers. To enhance product safety and prevent accidental swallowing of the batteries by infants and young children, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for increased safety. Reason: To prevent accidental swallowing of batteries. Production date: from January 2026 in Japan Deliveries to EMEA distribution partners: from March 2026 As this change is currently being rolled out, you may receive mixed deliveries of the current and updated versions during the transition period. Please note: The EC4 replacement sensors, both old and new, are not compatible with each other. Similarly, the conditioning solutions for the old and new versions are not compatible with the respective device variants. How can you tell if you have an older or a new device? If your Pocket Tester is marked ‘4-cell’, you have the latest version of this device. In this case, you will need the replacement sensors listed in the cross-selling section, as well as the standard and conditioning solutions. These have been specially optimised for the new Pocket Testers and are not suitable for the older models.

Find out more about the accuracy of HORIBA’s pocket conductivity testers: your ideal choice for precise conductivity measurements. The EC-11, EC-22 and EC-33 models, manufactured in Japan, represent the pinnacle of quality in pocket testers. They offer numerous benefits for users in laboratories, industry, aquaculture, water treatment, schools and universities, as well as amateur gardeners. An overview of the HORIBA Conductivity Pocket Tester series: Model EC-11: Water resistance, micro-sample analysis from 0.12 ml and a conductivity measurement range of up to 19.99 mS/cm are the key features of these instruments. They are straightforward to use and maintain, ensuring long-term reliability. Model EC-22: Offers a larger temperature display and a wider measurement range. Perfect for advanced applications where the temperature of the medium must be determined for detailed analysis. Model EC-33: With the widest measurement range, TDS measurement capability and advanced features, this model sets new standards. Designed for professionals who need to take the most precise measurements under varying conditions. Applications and benefits for the user: ‘Immersion’: Direct measurement is possible in solutions. For example, you can immerse the tester in a beaker and determine the value. ‘Scoop’: The hinged lid, which acts as a scoop here, allows you to easily take a sample from a hard-to-reach area. ‘Drops’: Efficient analysis of the smallest volumes. Thanks to their user-friendliness, durability and ‘Made in Japan’ quality, HORIBA pocket conductivity testers are a reliable solution for various measurement applications. Manufacturer’s item number: 3999960127 LAQUAtwin EC-33: The world’s first pocket-sized conductivity meter Your mobile laboratory – for on-site use: Ideal for water quality testing in aquariums, foodstuffs and many other applications. HORIBAs unique compact meter integrates the electrode, display and sample chamber to enable simple, effective on-site testing through direct measurement using a single drop. Minimum sample volume: 0.12 ml Up to 3 calibration points Conductivity, TDS and temperature display Automatic range Automatic calibration Automatic standard recognition: 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm Automatic temperature compensation: 2%/°C fixed Temperature calibration: 5 to 40.0 °C 4 curves for total dissolved solids: TDS factor 0.4 to 1.0, EN 27888, 442, NaCl Automatic stable / automatic hold measurement Automatic switch-off: 30 mins Low battery indicator IP67 rating: dust and waterproof Replaceable sensor 400-hour battery life: continuous operation without backlight Materials: ABS-epoxy housing and titanium coating with platinum-black sensor Display: custom (monochrome) LCD with backlight Operating conditions: 5 to 40°C, 85% or less relative humidity Warranty: 2 years – meter, 6 months – sensor Packaged in a practical carrying case Supplied with 1413 µS/cm & 12.88 mS/cm conductivity standards (14 ml each), conditioning solution (4 ml), 2 x CR2032 batteries, dropper, instructions and quick start guide Horiba LAQUAtwin – Portable precision for water treatment The compact Horiba LAQUAtwin pocket testers offer a fast, precise and straightforward solution for on-site measurement of key water parameters – directly from a single drop. In the HeylNeomeris shop, you will find selected models for professional use in water treatment, environmental analysis, aquaculture or everyday laboratory work. Why LAQUAtwin devices are ideal for water treatment: Measurement directly from a drop – only 0.05 ml sample volume required Fast results – ideal for mobile checks and spot analyses Accurate results – laboratory quality despite compact design Easy to use – no prior knowledge required Waterproof housing (IP67) – robust and suitable for outdoor use Applications in water treatment: Rapid tests in drinking water analysis or for quality control of process water Regular monitoring of parameters such as pH, conductivity, calcium, sodium or nitrates Interim checks in the laboratory or plant where larger instruments are impractical Ideal for service personnel, field staff or operators of small plants Examples of models available in the HeylNeomeris Shop: Horiba LAQUAtwin pH-11 – for precise pH measurements Horiba LAQUAtwin EC-33 – for conductivity measurement Horiba LAQUAtwin Na-11, Ca-11, NO3-11 – specifically for measuring ions such as sodium, calcium or nitrate Additional information We would like to inform you of an upcoming product update for the LAQUAtwin pocket-sized analysers. To enhance product safety and prevent infants and young children from accidentally swallowing the batteries, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for increased safety. Reason: To prevent accidental swallowing of batteries. Production date: from January 2026 in Japan Deliveries to EMEA distribution partners: from March 2026 As this is a change currently being rolled out, mixed deliveries of the current and updated versions may occur during the transition phase. Please note: The EC4 replacement sensors, both old and new, are not compatible with each other. Similarly, the conditioning solutions for the old and new versions are not compatible with the respective device variants. How can you tell if you have an older or a new device? If your Pocket Tester is marked ‘4-cell’, you have the latest version of this device. In this case, you will need the replacement sensors listed in the cross-selling section, as well as the standard and conditioning solutions. These have been specially optimised for the new Pocket Testers and are not suitable for the older models.

Frequently Asked Questions What do I need this meter for in everyday life? It measures the conductivity of liquids, e.g. in water treatment, laboratories or hydroponics. Is the device easy to use, even for beginners? Yes, it has a simple design and shows the reading directly on the display. Can I use the device in water? Yes, it is waterproof and can be submerged in liquids without any problems. What does automatic temperature compensation mean? The device automatically adjusts readings to the water temperature for more accurate results. Will I need to replace the electrode at some point? Yes, the electrode is replaceable and can be changed when necessary. For which applications is the meter particularly suitable? Ideal for aquariums, hydroponics, swimming pools and general water analysis.

Frequently Asked Questions What exactly is this meter used for? It measures high conductivity levels in water, for example in industry, agriculture or water treatment. Can I use it to measure water with a high mineral content? Yes, the meter is designed specifically for this purpose and delivers reliable results even at high levels. Is the meter suitable for outdoor use? Yes, it is waterproof and can be used in the field or on the go without any problems. Do I need to take the temperature into account when measuring? No, the automatic temperature compensation takes care of that for you. Can the measuring tip be replaced if necessary? Yes, the electrode can be easily replaced when it is worn out. Who would particularly benefit from this device? Anyone who needs to regularly check water quality with higher readings.

Frequently Asked Questions What does a TDS meter actually measure? A TDS meter measures the electrical conductivity of the water, which is caused by dissolved substances. This is used to calculate a value for the total amount of dissolved solids. It is important to note that the meter only displays the quantity of dissolved substances, not their type or purity. A high TDS value therefore does not automatically mean that the water is contaminated or unhealthy – nor does a low value guarantee that the water is free from pollutants. Measurement range: 0 to 1990 ppm (mg/l) What does TDS mean? What is ppm? TDS stands for Total Dissolved Solids – that is, the total amount of all dissolved solids in the water. These include minerals, salts, metals and organic substances dissolved in the water. The concentration of these dissolved substances is given in milligrams per litre (mg/L) or parts per million (ppm). Is it easy to use, even for beginners? Yes. Switch it on, dip it in the water and read the value straight away – no prior knowledge required. How accurate are the measurement results? For everyday use, the readings are reliable and provide a good indication of water quality. Can I use the tester when I’m out and about? Yes, the device is compact, lightweight and fits easily into any bag. Who would particularly benefit from buying this? Ideal for anyone who wants to check their water quality quickly and easily themselves.

Frequently Asked Questions How do I measure water quality correctly with this device? Simply hold it in the water, wait a moment, and read the EC value straight away. What can I use the EC Pen for? Ideal for plants, hydroponics, aquariums and general water monitoring. Is it easy for beginners to use? Yes, the device is very simple to use and ready for immediate use. Do I need to calibrate the tester regularly? Yes, regular calibration ensures consistently accurate results. How quickly does the device display a result? The measurement is taken in a few seconds immediately after immersion. Is the Milwaukee CD601 Digital Conductivity Pen (EC) robust enough for daily use? Yes, it is designed for regular use and withstands typical everyday wear and tear well.

Frequently Asked Questions What does the Milwaukee CD610 TDS tester measure? The Milwaukee CD610 measures the total dissolved solids (TDS) content in water. It records the total amount of substances dissolved in the water and displays the value in ppm (parts per million) or mg/L. The measuring range extends from 0 to 10,000 ppm, making it suitable even for water with a higher mineral or salt content. Can I use it to check water quality quickly? Yes, the device provides a reading within a few seconds, saving you the hassle of time-consuming water tests. What applications is the meter suitable for? Ideal for drinking water, aquariums, ponds, hydroponics, swimming pools and many other water applications. Do I need experience with such meters? No, it is easy to use and straightforward even for beginners. Can I use the device on the go? Yes, thanks to its compact pen-like shape, it fits comfortably in a pocket or toolbox. How do I read the result? The measurement is shown directly on the digital display and is easy to read. Why is a digital meter better than test strips? You get quick, accurate results without having to compare colours or make estimates. Is the device also suitable for water with a high mineral content? Yes, it has been specially developed for higher measurement ranges and is suitable for many types of water.

Frequently Asked Questions How can I measure the EC value in water quickly and easily? Simply dip it into the sample, wait a moment, and read the value straight away. What can I use the EC Pen for? Ideal for plant care, hydroponics, aquariums and general water testing. Can I use it without any prior knowledge? Yes, the device is very straightforward and ready to use straight away. How accurate are the readings in everyday use? The readings are reliable and well suited for regular checks. How often should I calibrate the device? Regular calibration ensures consistently accurate results. For which liquids can I use the meter? It is suitable for many water-based solutions where conductivity needs to be tested. Can I read the values directly on the display? Yes, the display shows the measurement results clearly and legibly. Is the Milwaukee CD611 conductivity tester also suitable for use on the go? Yes, thanks to its compact design, it fits easily into any bag. How quickly do I get a measurement result? The reading is usually displayed within a few seconds. Who is the Milwaukee CD611 particularly suitable for? For anyone who wants to check conductivity values easily, quickly and reliably.

Frequently Asked Questions What does a TDS meter actually measure? A TDS meter measures the electrical conductivity of the water, which is caused by dissolved substances. This is used to calculate a value for the total amount of dissolved solids. It is important to note that the meter only indicates the quantity of dissolved substances, not their type or purity. A high TDS value therefore does not automatically mean that the water is contaminated or unhealthy – nor does a low value guarantee that the water is free from pollutants. Measurement range: 0 to 990 ppm (mg/l) What does TDS mean? What is ppm? TDS stands for Total Dissolved Solids – that is, the total amount of all dissolved solids in the water. These include minerals, salts, metals and organic substances dissolved in the water. The concentration of these dissolved substances is given in milligrams per litre (mg/L) or parts per million (ppm). Is it easy to use, even for beginners? Yes. Switch it on, dip it in the water and read the value straight away – no prior knowledge required. How accurate are the measurement results? For everyday use, the readings are reliable and provide a good indication of water quality. Can I use the tester when I’m out and about? Yes, the device is compact, lightweight and fits easily into any bag. Who would particularly benefit from buying this? Ideal for anyone who wants to check their water quality quickly and easily themselves.

This Nutrient Meter is designed for Hydroponics, horticulture and agriculture to help you make sure that your vegetables and plants are receiving the right amount of nutrient to promote healthy growth with low to zero product waste. Keep EC/TDS in your target range to help your achieve better results.- Readings are displayed with 20 LEDs graph bar- Range 0.2 to 4 mS/cm- The alarm feature is user settable and is displayed on the LED bar- No calibration required- Auto-ON/OFF function- The auto-check feature indicates the battery level- Waterproof and floating design makes the stick an appropriate tool for stirring nutrient solutions in a bucket/tank- Graphite EC probe with ATC

Frequently Asked Questions Can I use the device even if I have no prior knowledge? Yes, it is easy to use and the readings can be taken quickly. What can I actually measure with this tester? You can check the water quality based on conductivity, TDS value and temperature. Is the device suitable for outdoor use? Yes, the waterproof housing protects the device when used in damp environments. Will I need to replace the probe at some point? Yes, the probe is replaceable and can be replaced if necessary. How quickly do I get a measurement result? The measurement is taken within a few seconds of immersion in water. For which applications is the device particularly suitable? It is suitable for aquariums, hydroponics, swimming pools and many other water-related applications. Is the device compact enough for use on the go? Yes, thanks to its handy size, it fits easily into a bag or toolbox.

Frequently Asked Questions Can I check the water parameters on the spot? Yes, this compact device is ideal for quick measurements on the go. What water applications is the tester suitable for? It is suitable for aquariums, hydroponics, swimming pools and many other areas. Do I need to buy several devices for different measurements? No, the tester measures several key water parameters in a single device. It combines EC, TDS and temperature measurements in a waterproof unit and offers automatic temperature compensation. Measurement parameters: Conductivity (high range) | TDS (total dissolved solids) | Temperature Measuring range: 0.00 to 20.00 mS/cm | 0.00 to 10.00 ppt (= 10,000 ppm) TDS | 0.0 to 60.0 °C How easy is it to use on a daily basis? Measurements can be taken in just a few simple steps and the display is easy to read. What happens if the probe wears out? The probe can be replaced without having to replace the entire device. Is the device splash-proof? Yes, the waterproof housing is designed for damp working environments. How quickly do I see the measurement result? The values are shown on the display within a few seconds.