The maintenance set consists of: Filter cartridge filter fineness 50µm, length 248mm ITP activated carbon filter cartridge (poured) GAC-10. Filter fineness 20µm, length 248mm Area of application: Chlorine absorption Membrane filter element GR25. Filter fineness absolute 0.2µm, length 10’ Retention 99.98% O-ring for filter cup ES Slim Line Membrane 3012 for Diluat under-sink system O-ring for pressure pipe 3012 MB A6K4 ‘disposable quality’ mixed bed resin (no VOC) Mixture resin: anions: 60% - cations 40% UV lamp 25W for UV 2100 Operating time max. 12 months Frequently Asked Questions What is the 12- or 24-month maintenance pack for? It contains all the wear parts required for the regular servicing of the NeoPureMini system. Which filter stages are included in the pack? A pre-filter, an activated carbon filter and a high-precision membrane filter for water treatment. What is the role of the activated carbon filter in the set? The activated carbon filter serves to reliably remove dissolved chlorine and organic pollutants from the water. Thanks to the porous structure of the activated carbon (adsorption), these substances are bound like a magnet. In addition, unpleasant odours and tastes are neutralised. The most important function in detail: Chlorine absorption (dechlorination): Free chlorine and chlorine-containing compounds are filtered out of the water. What does the 0.2 µm membrane filter do? It ensures very fine final filtration with a high retention capacity. Why is mixed-bed resin included in the maintenance pack? It removes dissolved ions and stabilises water quality. Mixed-bed resin needs to be replaced because its capacity to bind ions is exhausted after a certain period of time. Depending on the water flow rate and the water’s hardness, the resin’s capacity to absorb minerals, salts and silicates is depleted, causing it to lose its filtering effect. Regardless of the water volume, the resin should be replaced after approximately 1 to 2 years, as the chemical structure of the material can age and performance declines. Which UV component is included in the set? A 25W UV lamp for germ reduction with a limited operating life (max. 12 months). Which seals are included in the maintenance pack? O-rings for the filter cup and pressure pipe to ensure a secure seal. What is the 3012 membrane used for? It is a key component for water treatment in the under-sink system. It is a top-quality water filter for water treatment. How does this pack differ from the 36-month set? It is designed for shorter maintenance intervals and contains fewer long-life wear parts. Why is a complete maintenance pack a good idea? All key parts are replaced at the same time, which simplifies maintenance and reduces downtime.

The maintenance set consists of: EX 50 - 248 filter cartridge filter fineness 50µm, length 248mm ITP activated carbon filter cartridge (poured) GAC-10. filter fineness 20µm, length 248mm Area of application: chlorine absorption Membrane filter element GR25. Filter fineness absolute 0.2µm, length 10’ Retention 99.98% O-ring for filter cup ES Slim Line. Membrane 3012 for Diluat under-sink system. O-ring for pressure pipe 3012. MB A6K4 ‘disposable quality’ mixed bed resin (no VOC) Mixture resin: anions: 60% - cations 40%. UV lamp 25W for UV 2100 Operating time max. 12 months. Quartz glass for UV 2100 + UV 4100 Operating time max. 36 months. Booster pump for Diluat under-counter system. High-pressure switch for Diluat under-counter system. Low pressure switch for Diluat under-counter system. Solenoid valve for Diluat under-sink system. Frequently Asked Questions What is the NeoPureMini maintenance pack designed for? It contains all the essential spare parts required for operation, maintenance and safe functioning after 36 months of use. Which filters are included in the maintenance pack? Several filter stages, including pre-filters, activated carbon filters and fine filters down to the micro-range. What role does the 0.2 µm membrane filter play? It ensures very fine final filtration with a high retention rate of 99.98%. Why is mixed-bed resin included in the pack? It improves water quality by removing dissolved ions. What is the UV lamp in the system used for? It aids in the reduction of bacteria in the water during operation. With a service life of up to 12 months, this UV lamp ensures reliable disinfection of the water. Timely replacement guarantees consistently high performance of the disinfection system and helps to maintain the microbiological purity of the water in the long term. What is the purpose of the quartz glass? The quartz glass for the CINTROPUR UV 2100 and UV 4100 models acts as a protective barrier between the UV lamp and the water and is a key component for reliable UV disinfection. Thanks to its high light transmittance, it enables the optimal transmission of UV-C radiation, which is necessary for the effective reduction of microorganisms. To ensure consistently high disinfection performance, the quartz glass should be replaced every 36 months. An intact and clean quartz glass ensures that the UV radiation reaches the water unimpeded and that the system’s effectiveness is maintained. What electrical components are included? A booster pump, high- and low-pressure switches, and a solenoid valve. Why are several O-rings included in the set? They serve as seals for filter and pressure components in the system. Why is a complete maintenance package advisable? All wear parts are replaced as a set, which reduces downtime and simplifies maintenance.

The maintenance set consists of: EX 50 - 248 filter cartridge filter fineness 50µm, length 248mm ITP activated carbon filter cartridge (poured) GAC-10. filter fineness 20µm, length 248mm Area of application: chlorine absorption Membrane filter element GR25. Filter fineness absolute 0.2µm, length 10’ Retention 99.98%. O-ring for filter cup ES Slim Line. Membrane 3012 for Diluat under-sink system. O-ring for pressure pipe 3012. MB A6K4 ‘disposable quality’ mixed bed resin (no VOC) Mixture resin: anions: 60% - cations 40%. Frequently Asked Questions For which water conditions is this maintenance package intended? For regions with high water hardness above 14°dH. What is the maintenance package used for in an under-sink system? It ensures the reliable operation of the system over several maintenance intervals. Which filter stages are included in the package? A pre-filter, an activated carbon filter and a high-precision membrane filter. What is the role of the pre-filter (50 µm)? It removes coarse particles such as sand or rust from the water. What is the function of the activated carbon filter? The activated carbon filter reliably removes dissolved chlorine and organic impurities from the water. Thanks to the large porous surface area of the activated carbon, these substances are effectively bound and retained by adsorption. At the same time, the filter helps to reduce unwanted odours and tastes. A key function is the dechlorination of the water: free chlorine and chlorine-containing compounds are effectively filtered out. What does the membrane filter in the set do? It ensures very fine filtration with a high retention rate of 99.98%. Why is mixed-bed resin included? Mixed-bed resin helps to stabilise water quality by removing dissolved ions from the water. Over time, however, its ability to bind ions diminishes. Depending on the water flow rate and the hardness of the water, the absorption capacity for minerals, salts and silicates is gradually exhausted, causing the resin’s effectiveness to diminish and making replacement necessary. Which seals are included in the maintenance pack? O-rings for the filter cup and pressure pipe to ensure a secure seal. What is the 3012 membrane used for? It is an essential component of water treatment in the under-sink system. As a high-performance water filter, it ensures effective water treatment. For which maintenance intervals is the set suitable? For 6, 18 and 30 months, depending on usage and load.

The maintenance set consists of: EX 50 - 248 filter cartridge filter fineness 50µm, length 248mm ITP activated carbon filter cartridge (poured) GAC-10. filter fineness 20µm, length 248mm Area of application: chlorine absorption Membrane filter element GR25. Filter fineness absolute 0.2µm, length 10’ Retention 99.98%. O-ring for filter cup ES Slim Line. Frequently Asked Questions For which water conditions is this maintenance pack designed? For regions with low water hardness below 14°dH. What is the maintenance pack used for in the under-sink system? It ensures the safe operation of the system over defined maintenance cycles. Which filter stages are included in the set? A pre-filter, an activated carbon filter and a high-precision membrane filter. What is the function of the 50 µm pre-filter? It removes coarse particles such as sand or rust from the water. What does the activated carbon filter do in the system? It reduces chlorine and organic substances in the water. What performance does the membrane filter offer? It filters very finely at 0.2 µm with a high retention rate of 99.98%. Which seal is included in the maintenance pack? An O-ring for the filter cup ensures a secure seal. What maintenance intervals is the set designed for? For 6, 18 and 30 months, depending on operating conditions. How does this pack differ from the version for hard water? Due to the lower water hardness, fewer parts need to be replaced.