Installation material Maintenance package 36 months NeoPureMini
€1,746.38*
Please log in to receive your conditions.
Available in 14 days, delivery time 1-2 days
(Login for quotation) The entered number of pieces will be taken into account when creating the quotation.
Product information "Installation material Maintenance package 36 months NeoPureMini"
The maintenance set consists of:
EX 50 - 248 filter cartridge filter fineness 50µm, length 248mm
ITP activated carbon filter cartridge (poured) GAC-10. filter fineness 20µm, length 248mm Area of application: chlorine absorption
Membrane filter element GR25. Filter fineness absolute 0.2µm, length 10’ Retention 99.98%
O-ring for filter cup ES Slim Line.
Membrane 3012 for Diluat under-sink system.
O-ring for pressure pipe 3012.
MB A6K4 ‘disposable quality’ mixed bed resin (no VOC) Mixture resin: anions: 60% - cations 40%.
UV lamp 25W for UV 2100 Operating time max. 12 months.
Quartz glass for UV 2100 + UV 4100 Operating time max. 36 months.
Booster pump for Diluat under-counter system.
High-pressure switch for Diluat under-counter system.
Low pressure switch for Diluat under-counter system.
Solenoid valve for Diluat under-sink system.
Frequently Asked Questions
It contains all the essential spare parts required for operation, maintenance and safe functioning after 36 months of use.
Several filter stages, including pre-filters, activated carbon filters and fine filters down to the micro-range.
It ensures very fine final filtration with a high retention rate of 99.98%.
It improves water quality by removing dissolved ions.
It aids in the reduction of bacteria in the water during operation. With a service life of up to 12 months, this UV lamp ensures reliable disinfection of the water. Timely replacement guarantees consistently high performance of the disinfection system and helps to maintain the microbiological purity of the water in the long term.
The quartz glass for the CINTROPUR UV 2100 and UV 4100 models acts as a protective barrier between the UV lamp and the water and is a key component for reliable UV disinfection. Thanks to its high light transmittance, it enables the optimal transmission of UV-C radiation, which is necessary for the effective reduction of microorganisms. To ensure consistently high disinfection performance, the quartz glass should be replaced every 36 months. An intact and clean quartz glass ensures that the UV radiation reaches the water unimpeded and that the system’s effectiveness is maintained.
A booster pump, high- and low-pressure switches, and a solenoid valve.
They serve as seals for filter and pressure components in the system.
All wear parts are replaced as a set, which reduces downtime and simplifies maintenance.
Dimensions
| Height | 40 cm |
|---|---|
| Length | 30 cm |
| Width | 60 cm |
Weight
| Weight | 30 kg |
|---|