For applications that do not require deionized water, we offer a customized version of our cabinet system that is capable of producing permeate. Unlike the deionized water treatment system, the permeate cabinet system consists of only one cabinet. Water treatment is carried out using a pre-filter, a water softener, a reverse osmosis system with a 100-liter permeate tank including a water seal and sterile filter, and a pressure booster station. If required, a brine lifting system can also be integrated into the first cabinet. The installed components are listed again below: Cabinet Filter system (pre-filter & activated carbon filter) Softening system Reverse osmosis system 100-liter permeate tank (volume can be adjusted) Pressure booster station Brine lifting system (optional)  System performance: Depending on the system design, 90 l, 150 l, 230 l, or 300 l of permeate can be produced per hour. The capacity of the permeate tank is adjustable, but may need to be positioned outside the cabinet due to its larger dimensions. Shut-off via system separator To protect the drinking water network from contamination by treated water or changes in the natural composition of the drinking water fed into the system as a result of technical treatment, the installation of a system separator is mandatory. The system has an integrated system separator (type BA), which is located directly behind the Aqua-Stop of the water connection. Aqua-Stop (solenoid valve shut-off) An Aqua-Stop is a safety mechanism used in water supply systems to stop or limit the flow of water in the event of a malfunction or leak. It is usually an automatic shut-off mechanism that closes the water supply valve to prevent major water damage. A solenoid valve is a type of shut-off valve that is controlled by the use of an electromagnetic field. In water treatment, a solenoid valve is used to shut off or regulate the flow of water. The solenoid valve consists of an electromagnetic coil system and a valve mechanism. Applying an electrical voltage to the coil generates a magnetic field that influences the valve mechanism. Depending on the application, the solenoid valve can be opened or closed to allow or block the flow of water. In combination, additional safety and control over the water flow can be ensured. The Aqua-Stop is located directly behind the main water connection of the system as the first element. The associated solenoid valve is coupled with two sensors, one of which continuously monitors the base trays of the two cabinet systems.  Filter system The pre-filter section is a filter unit consisting of a pre-filter and an activated carbon filter. Its main purpose is to protect downstream softening and osmosis systems, which could be damaged by impurities in the water. Water softener A water softener is used to remove excess minerals, especially calcium and magnesium ions, which are responsible for the hardness of the water. It works on the basis of an ion exchange process. Reverse osmosis Reverse osmosis reverses the natural osmotic process. In this process, the softened water is forced through a membrane under pressure, whereby the membrane only allows water molecules and very small molecules to pass through and retains larger particles such as salts, bacteria, viruses, and other impurities. Permeate tank A round tank offers advantages in terms of stability, cleaning, energy efficiency, and space utilization, making it the preferred choice for storing and treating water in treatment plants. Its uniform shape and flow characteristics ensure that water is treated and stored efficiently. Pressure boosting station A pressure boosting station is used to continuously supply the connected consumers with the required operating pressure. Cabinet systems Only a minimum floor space of 0.80 m x 1.40 m is required to install this module from HeylNeomeris. The module consists of a cabinet that is 0.80 m wide and 0.60 m deep. It is possible to use double doors, which, due to the depth of 60 cm and a double door with a dimension of 40 cm, results in a minimum room depth of 1 m. The cabinets used are made of sturdy sheet steel modules and have a high-quality surface coating. Wastewater disposal via brine lifting unit (optional) As an optional component, the treatment plant can be expanded to include an integrated wastewater lifting unit, which transports the generated and collected wastewater into the sewer system. The main wastewater flows here are the wastewater from the regeneration of the softening plant and the concentrate from the reverse osmosis process. Collection tray The integrated collection tray in the cabinet serves to collect potential leaks or escaping liquids that could escape from the pipes or components. This is particularly important, for example, in industrial applications or in environments where sensitive electronic equipment or chemicals are stored. Frequently Asked Questions What is the function of this cabinet system in my business? It treats tap water and supplies it as usable permeate for technical processes. What is the maximum water output? The system can produce up to 150 litres of treated water per hour. What are the benefits of the compact design? All key components are housed in a single cabinet to save space. Is the system ready for immediate use after installation? Yes, it is designed as a complete unit and can be operated once connected. Can the system be adapted to different requirements? Yes, it can be integrated into or expanded to suit existing processes as required. For which applications is the 150 l/h capacity suitable? Particularly for small to medium-sized applications with a constant water demand.

For applications that do not require deionised water, we offer a modified version of our cabinet system that is capable of producing permeate. Unlike the deionised water treatment system, the permeate cabinet system consists of only one cabinet. Water treatment involves pre-filtration, a softening system, a reverse osmosis system with a 100-litre permeate tank including a water seal and sterile filter, and a pressure booster station. If required, a brine lifting system can also be integrated into the first cabinet. The installed components are listed again below: Cabinet Filter system (pre-filter & activated carbon filter) Water softener Reverse osmosis system Permeate tank 100 litres (volume can be adjusted) Pressure booster station Brine lifting system (optional) System performance: Depending on the system design, 90 l, 150 l, 230 l or 300 l of permeate can be produced per hour. The capacity of the permeate tank is adjustable, but may need to be positioned outside the cabinet due to its larger dimensions. Shut-off via system separator To protect the drinking water network from contamination by treated water or changes in the natural composition of the drinking water fed into the system as a result of technical treatment, the installation of a system separator is mandatory. The system has an integrated system separator (type BA), which is located directly behind the Aqua-Stop of the water connection. Aqua-Stop (solenoid valve shut-off) An Aqua-Stop is a safety mechanism used in water supply systems to stop or limit the flow of water in the event of a malfunction or leak. It is usually an automatic shut-off mechanism that closes the water supply valve to prevent major water damage. A solenoid valve is a type of shut-off valve that is controlled by the use of an electromagnetic field. In water treatment, a solenoid valve is used to shut off or regulate the flow of water. The solenoid valve consists of an electromagnetic coil system and a valve mechanism. Applying an electrical voltage to the coil generates a magnetic field that influences the valve mechanism. Depending on the application, the solenoid valve can be opened or closed to allow or block the flow of water. In combination, additional safety and control over the water flow can be ensured. The Aqua-Stop is located directly behind the main water connection of the system as the first element. The associated solenoid valve is coupled with two sensors, one of which continuously monitors the base trays of the two cabinet systems. Filter system The pre-filter section is a filter unit consisting of a pre-filter and an activated carbon filter. Its main purpose is to protect downstream softening and osmosis systems, which could be damaged by impurities in the water. Water softener A water softener is used to remove excess minerals, especially calcium and magnesium ions, which are responsible for the hardness of the water. It works on the basis of an ion exchange process. Reverse osmosis Reverse osmosis reverses the natural osmotic process. In this process, the softened water is forced through a membrane under pressure, whereby the membrane only allows water molecules and very small molecules to pass through and retains larger particles such as salts, bacteria, viruses and other impurities. Permeate tank A round tank offers advantages in terms of stability, cleaning, energy efficiency and space utilisation, making it the preferred choice for storing and treating water in treatment plants. Its uniform shape and flow characteristics ensure that the water is treated and stored efficiently. Pressure boosting station A pressure boosting station is used to continuously supply the connected consumers with the required operating pressure. Cabinet systems Only a minimum floor space of 0.80 m x 1.40 m is required to install this module from HeylNeomeris. The module consists of a cabinet that is 0.80 m wide and 0.60 m deep. It is possible to use double doors, which, due to the depth of 60 cm and a double door with a dimension of 40 cm, results in a minimum room depth of 1 m. The cabinets used are made of sturdy sheet steel modules and have a high-quality surface coating. Wastewater disposal via brine lifting unit (optional) As an optional component, the treatment plant can be expanded to include an integrated wastewater lifting unit, which transports the generated and collected wastewater into the sewer system. The main wastewater flows here are the wastewater from the regeneration of the softening plant and the concentrate from the reverse osmosis process. Collection tray The integrated collection tray in the cabinet serves to collect potential leaks or escaping liquids that could escape from the pipes or components. This is particularly important, for example, in industrial applications or in environments where sensitive electronic equipment or chemicals are stored. Frequently Asked Questions What exactly does the system do, and what do I need it for? It treats water and supplies clean permeate for many applications that do not require complete desalination. How much water can the system supply per hour? In this version, up to 300 litres per hour – ideal for constant demand. What is included in the system? It comprises filters, water softening, reverse osmosis, a tank and a pressure booster in a compact cabinet. Do I need any additional accessories, or is everything integrated? The main components are integrated; optionally, a brine pump system can also be integrated into the first cabinet if required. Can the system be flexibly adapted to my needs? Yes, the capacity and tank size can be adjusted depending on the application. Why is a system separator integrated? It protects the drinking water supply from treated water flowing back into it.

For applications that do not require deionised water, we offer a modified version of our cabinet system that is capable of producing permeate. Unlike the deionised water treatment system, the permeate cabinet system consists of only one cabinet. Water treatment involves pre-filtration, a softening system, a reverse osmosis system with a 100-litre permeate tank including a water seal and sterile filter, and a pressure booster station. If required, a brine lifting system can also be integrated into the first cabinet. The installed components are listed again below: Cabinet Filter system (pre-filter & activated carbon filter) Water softener Reverse osmosis system Permeate tank 100 litres (volume can be adjusted) Pressure booster station Brine lifting system (optional) System performance: Depending on the system design, 90 l, 150 l, 230 l or 300 l of permeate can be produced per hour. The capacity of the permeate tank is adjustable, but may need to be positioned outside the cabinet due to its larger dimensions. Shut-off via system separator To protect the drinking water network from contamination by treated water or changes in the natural composition of the drinking water fed into the system as a result of technical treatment, the installation of a system separator is mandatory. The system has an integrated system separator (type BA), which is located directly behind the Aqua-Stop of the water connection. Aqua-Stop (solenoid valve shut-off) An Aqua-Stop is a safety mechanism used in water supply systems to stop or limit the flow of water in the event of a malfunction or leak. It is usually an automatic shut-off mechanism that closes the water supply valve to prevent major water damage. A solenoid valve is a type of shut-off valve that is controlled by the use of an electromagnetic field. In water treatment, a solenoid valve is used to shut off or regulate the flow of water. The solenoid valve consists of an electromagnetic coil system and a valve mechanism. Applying an electrical voltage to the coil generates a magnetic field that influences the valve mechanism. Depending on the application, the solenoid valve can be opened or closed to allow or block the flow of water. In combination, additional safety and control over the water flow can be ensured. The Aqua-Stop is located directly behind the main water connection of the system as the first element. The associated solenoid valve is coupled with two sensors, one of which continuously monitors the base trays of the two cabinet systems. Filter system The pre-filter section is a filter unit consisting of a pre-filter and an activated carbon filter. Its main purpose is to protect downstream softening and osmosis systems, which could be damaged by impurities in the water. Water softener A water softener is used to remove excess minerals, especially calcium and magnesium ions, which are responsible for the hardness of the water. It works on the basis of an ion exchange process. Reverse osmosis Reverse osmosis reverses the natural osmotic process. In this process, the softened water is forced through a membrane under pressure, whereby the membrane only allows water molecules and very small molecules to pass through and retains larger particles such as salts, bacteria, viruses and other impurities. Permeate tank A round tank offers advantages in terms of stability, cleaning, energy efficiency and space utilisation, making it the preferred choice for storing and treating water in treatment plants. Its uniform shape and flow characteristics ensure that the water is treated and stored efficiently. Pressure boosting station A pressure boosting station is used to continuously supply the connected consumers with the required operating pressure. Cabinet systems Only a minimum floor space of 0.80 m x 1.40 m is required to install this module from HeylNeomeris. The module consists of a cabinet that is 0.80 m wide and 0.60 m deep. It is possible to use double doors, which, due to the depth of 60 cm and a double door with a dimension of 40 cm, results in a minimum room depth of 1 m. The cabinets used are made of sturdy sheet steel modules and have a high-quality surface coating. Wastewater disposal via brine lifting unit (optional) As an optional component, the treatment plant can be expanded to include an integrated wastewater lifting unit, which transports the generated and collected wastewater into the sewer system. The main wastewater flows here are the wastewater from the regeneration of the softening plant and the concentrate from the reverse osmosis process. Collection tray The integrated collection tray in the cabinet serves to collect potential leaks or escaping liquids that could escape from the pipes or components. This is particularly important, for example, in industrial applications or in environments where sensitive electronic equipment or chemicals are stored. Frequently Asked Questions What is the permeate cabinet system used for? It supplies treated water (permeate) for technical and industrial applications. How much water does the system supply per hour? It produces up to 230 litres of permeate per hour. Which functions are already integrated into the cabinet system? Water treatment, storage and a pressure-boosting station are combined in a compact unit. Do I need to plan for additional components for operation? The system is supplied ready for operation; extensions are available as an option. How much space does the unit require approximately? It is designed as a compact cabinet system for technical rooms or utility rooms. What type of applications is the system intended for? It is suitable for processes that require a constant supply of treated water.

For applications that do not require deionised water, we offer a modified version of our cabinet system that is capable of producing permeate. Unlike the deionised water treatment system, the permeate cabinet system consists of only one cabinet. Water treatment involves pre-filtration, a softening system, a reverse osmosis system with a 100-litre permeate tank including a water seal and sterile filter, and a pressure booster station. If required, a brine lifting system can also be integrated into the first cabinet. The installed components are listed again below: Cabinet Filter system (pre-filter & activated carbon filter) Water softener Reverse osmosis system Permeate tank 100 litres (volume can be adjusted) Pressure booster station Brine lifting system (optional) System performance: Depending on the system design, 90 l, 150 l, 230 l or 300 l of permeate can be produced per hour. The capacity of the permeate tank is adjustable, but may need to be positioned outside the cabinet due to its larger dimensions. Shut-off via system separator To protect the drinking water network from contamination by treated water or changes in the natural composition of the drinking water fed into the system as a result of technical treatment, the installation of a system separator is mandatory. The system has an integrated system separator (type BA), which is located directly behind the Aqua-Stop of the water connection. Aqua-Stop (solenoid valve shut-off) An Aqua-Stop is a safety mechanism used in water supply systems to stop or limit the flow of water in the event of a malfunction or leak. It is usually an automatic shut-off mechanism that closes the water supply valve to prevent major water damage. A solenoid valve is a type of shut-off valve that is controlled by the use of an electromagnetic field. In water treatment, a solenoid valve is used to shut off or regulate the flow of water. The solenoid valve consists of an electromagnetic coil system and a valve mechanism. Applying an electrical voltage to the coil generates a magnetic field that influences the valve mechanism. Depending on the application, the solenoid valve can be opened or closed to allow or block the flow of water. In combination, additional safety and control over the water flow can be ensured. The Aqua-Stop is located directly behind the main water connection of the system as the first element. The associated solenoid valve is coupled with two sensors, one of which continuously monitors the base trays of the two cabinet systems. Filter system The pre-filter section is a filter unit consisting of a pre-filter and an activated carbon filter. Its main purpose is to protect downstream softening and osmosis systems, which could be damaged by impurities in the water. Water softener A water softener is used to remove excess minerals, especially calcium and magnesium ions, which are responsible for the hardness of the water. It works on the basis of an ion exchange process. Reverse osmosis Reverse osmosis reverses the natural osmotic process. In this process, the softened water is forced through a membrane under pressure, whereby the membrane only allows water molecules and very small molecules to pass through and retains larger particles such as salts, bacteria, viruses and other impurities. Permeate tank A round tank offers advantages in terms of stability, cleaning, energy efficiency and space utilisation, making it the preferred choice for storing and treating water in treatment plants. Its uniform shape and flow characteristics ensure that the water is treated and stored efficiently. Pressure boosting station A pressure boosting station is used to continuously supply the connected consumers with the required operating pressure. Cabinet systems Only a minimum floor space of 0.80 m x 1.40 m is required to install this module from HeylNeomeris. The module consists of a cabinet that is 0.80 m wide and 0.60 m deep. It is possible to use double doors, which, due to the depth of 60 cm and a double door with a dimension of 40 cm, results in a minimum room depth of 1 m. The cabinets used are made of sturdy sheet steel modules and have a high-quality surface coating. Wastewater disposal via brine lifting unit (optional) As an optional component, the treatment plant can be expanded to include an integrated wastewater lifting unit, which transports the generated and collected wastewater into the sewer system. The main wastewater flows here are the wastewater from the regeneration of the softening plant and the concentrate from the reverse osmosis process. Collection tray The integrated collection tray in the cabinet serves to collect potential leaks or escaping liquids that could escape from the pipes or components. This is particularly important, for example, in industrial applications or in environments where sensitive electronic equipment or chemicals are stored. Frequently Asked Questions What tasks is this system best suited for? It reliably supplies treated water for smaller-scale technical applications. The system is particularly suitable for applications where permeate is required as purified process water. Typical areas of application include drinking water treatment, the food and beverage industry, and industrial processes such as boiler and feedwater treatment. It is also used in pharmaceutical production and in the electronics and semiconductor industries where water with significantly reduced salt and contaminant levels is required. Furthermore, it is suitable for laboratory technology and aquariums, where controlled water quality is crucial. Generally, it is used wherever efficiently treated water serves as the basis for further cleaning or production steps. How much permeate water can the system produce? The output is up to 90 litres per hour. What are the advantages of the compact design? The system requires little space and fits well into confined technical areas. Is the system suitable for continuous operation? Yes, it is designed for a continuous supply of permeate. How complex is the commissioning process? Once professionally connected, the system is ready for immediate use. Who is the 90 l/h version suitable for? For smaller applications with low but constant water demand.

The pressure booster station with permeate storage tank for the NeoPermlon permeate cabinet system has the task of supplying the required amount of water at sufficient pressure to the connected consumers. These consumers in modern commercial kitchens include steam cookers, coffee machines and dishwashers. The pressure increase ensures that these appliances are constantly supplied with the required water, while at the same time optimising the pressure conditions to the consumption requirements. Frequently Asked Questions What is the water booster station used for? It ensures a constant water pressure for connected appliances. What are the benefits of the 100-litre permeate tank during operation? It provides water at short notice and compensates for minor fluctuations in demand. What applications is this size suitable for? For smaller systems with moderate water requirements. Why is consistent pressure so important? To ensure that appliances operate reliably and without interruption. Can the station support multiple users simultaneously? Yes, it can supply several appliances in parallel. How does the tank affect day-to-day use? It ensures a stable and predictable water supply. What is the advantage of this compact solution? It offers reliable performance with a small footprint.

The pressure booster station with permeate storage tank for the NeoPermlon permeate cabinet system is designed to supply connected consumers with the required amount of water at sufficient pressure. In modern commercial kitchens, these include steam cookers, coffee machines and dishwashers. The pressure increase ensures that these appliances are continuously supplied with the required water at a pressure that is tailored to the demand. Frequently Asked Questions What is the pressure booster station used for in the system? It ensures that connected appliances are supplied with a constant flow of water. What are the benefits of the 200-litre permeate storage tank in everyday use? It stores water/permeate and reliably compensates for fluctuations in consumption. Why is a stable water pressure important? So that devices can operate at all times without interruption. How does the system cope with peak consumption? The tank supplies additional water when demand is high. Can I operate several devices at the same time? Yes, the supply is designed to cater for multiple users. What overall improvements does the pressure boosting provide? Operation becomes more consistent and reliable.

The pressure booster station with permeate storage tank for the NeoPermlon permeate cabinet system has the function of supplying the connected consumers with the required amount of water at sufficient pressure. In modern commercial kitchens, these include steam cookers, coffee machines and dishwashers. The pressure booster ensures that these appliances are supplied with the necessary water at a pressure adapted to the demand without interruption. Frequently Asked Questions Why do I need a booster station in the system? It ensures that all appliances are reliably supplied with water. A pressure booster station increases the water pressure in the pipework and keeps it constant. It is used whenever the pressure from the mains supply is insufficient, for example on the upper floors of high-rise buildings, in large-scale installations or during periods of high water consumption at peak times. What are the benefits of the 300-litre permeate storage tank? It stores permeate (water) and balances out peaks in consumption during operation. What applications is the system designed for? Particularly for commercial kitchens with appliances such as dishwashers or steam cookers. Why is water pressure so important in everyday life? So that all connected appliances can operate without interruption. How does the station support consistent operation? It adjusts the pressure and water flow to actual demand. Can I supply multiple appliances at the same time? Yes, the system is designed for parallel consumers. What overall improvements does the pressure boost provide? The supply becomes more stable and outages are avoided.

The pressure booster station with permeate storage tank for the NeoPermlon permeate cabinet system is designed to supply connected consumers with the required amount of water at sufficient pressure. In modern commercial kitchens, these include steam cookers, coffee machines and dishwashers. The pressure boost ensures that these appliances are supplied with water at a pressure corresponding to the demand without interruption. Frequently Asked Questions What is the 60-litre pressure booster station used for? It ensures a stable water pressure for smaller applications. What are the benefits of the 60-litre permeate tank in everyday use? It acts as a buffer to cope with short-term peaks in water consumption. For which applications is this model suitable? For smaller systems with low to medium water requirements. Why is a pressure booster necessary at all? To ensure that connected devices are reliably supplied with water. Can I operate several devices at the same time? Yes, this is easily possible within smaller systems. What are the advantages of the compact size? It saves space and can be integrated flexibly. How does this affect operation? The water supply remains constant and reliable.