Conductivity

The MW301 is a portable conductivity (EC) meter with automatic temperature compensation.It is designed to meet the farmer's need for equipment suitable for the aggressive environments of agriculture and hydroponics.Conductivity testing provides a method to optimise chemical use and minimise operating costs.In agriculture, soil conductivity is tested before fertiliser is applied to determine the need in the field, and after fertilisation to determine its effectiveness.In hydroponics, EC measurement is ideal for determining the concentration of fertiliser in a solution.After the determination, the grower can adjust the nutrient formula for optimal plant growth. The MW301 has a measuring range of 0 to 1990 µS/cm with a resolution of 1 µS/cm.This conductivity meter comes complete with conductivity probe with 1 m (3.3') cable and calibration solution.Design featuresMeasuring range 0 to 1990 µS/cm Fast, easy to read results with large digital LCD displaySupplied with a conductivity probe attached to a 3-foot cableAccuracy to ±2Lightweight and portable300 hours of continuous battery life (battery included)MW301 PRO comes complete with SE510 EC probe, 20ml 1413 µS/cm bag of calibration solution, screwdriver for calibration, 9V battery and instructions. Frequently Asked Questions What can I measure with the MW301 Pro? The MW301 is a portable electrical conductivity (EC) meter with automatic temperature compensation. Measurement parameter: EC (Electrical Conductivity) Measurement range: EC: 0 to 1999 µS/cm What can I use this meter for in everyday life? Ideal for monitoring water quality in agriculture, aquariums, hydroponic systems or other water applications. Is the device also suitable for regular measurements? Yes, it has been designed for reliable and repeatable measurements. Can I read the values quickly? Yes, the large display shows the measurement results clearly and legibly. Do I need to allow plenty of time to operate it? No, the measurement process is straightforward and takes just a few steps. Is the device suitable for beginners? Yes, the device is easy to use even without extensive experience. Can I use the meter in different locations? Yes, thanks to its compact design, it is easy to transport. Why is it worth having your own meter? You can check water values yourself at any time and do not have to wait for external tests.

MW302 is a high range portable conductivity meter (EC) with automatic temperature compensation.This meter is designed to meet the need for equipment suitable for agricultural and hydroponic environments and it is also an excellent meter for food, laboratory and water treatment applications.Conductivity testing provides a method for optimising chemical use and minimising operating costs and in hydroponics, conductivity measurement is ideal for determining the concentration of fertiliser in a solution.Once determined, one can adjust the nutrient formula for optimal plant growth.The MW302 has a measuring range of 0.0 to 10.0 mS/cm with a resolution of 0.1 mS/cm.This EC meter comes complete with conductivity probe with a 1m cable and calibration solution. Frequently Asked Questions Which parameter does the MW302 PRO EC meter measure? The MW302 is a portable high-range (EC High) conductivity meter with automatic temperature compensation. Measurement parameter: EC (Electrical Conductivity) Measurement range: EC: 0.0 to 10.0 mS/cm For which types of water is this meter suitable? It is particularly suitable for water with higher concentrations of dissolved substances. Can I take measurements directly on-site? Yes, the device is portable and delivers quick results. Is it easy for beginners to use? Yes, operation is straightforward and easy to understand. How easy is it to read the values? The large display ensures a clear and easy-to-read readout. Do I have to wait long for the measurement result? No, the readings are displayed within a few seconds. Can I use the device regularly? Yes, it is suitable for frequent use in both daily life and professional settings. Why should I measure my water values myself? You gain immediate clarity and can react promptly if necessary. For which applications is the device suitable? This meter was developed for agricultural and hydroponic applications and is also ideally suited for use in the food industry, laboratories, and water treatment.

The portable 4-in-1 MW306 PRO conductivity/TDS/NaCl (salinity)/temperature meter has won many fans worldwide with its reliable fast and easy operation. It is also very rugged and has IP67 waterproof rating.   It has a user-friendly interface for data exchange and as mentioned at the beginning, it is designed to measure four different parameters of water.  Ideal for use in hydroponics, horticulture, laboratories, food processing, water treatment and many other applications with demanding measurement requirements.

MW401 is a portable TDS meter with automatic temperature compensation and low range.This meter is designed for aquariums, aquaculture, laboratories and water treatment applications to meet the needs of both hobbyists and professionals.It is also an excellent meter for food labs and water treatment applications.TDS tests provide a method for optimising chemical use and minimising operating costs.In aquariums and aquaculture, high concentrations of total dissolved solids (TDS) can affect water clarity and reduce photosynthesis of aquatic plants.In water treatment, high TDS can affect the clarity and taste of drinking water.The MW401 has a measuring range of 0 to 1990 mg/L (ppm) with a resolution of 10 mg/L (ppm).This meter comes complete with conductivity probe with 1 m (3.3') cable and calibration solution. Frequently Asked Questions What can I use this tester for? Ideal for testing drinking water, aquariums, reverse osmosis systems and other water applications. How quickly do I get a reading? The result appears on the display within a few seconds. Is the device suitable for beginners? Yes, it is straightforward to use and requires no prior knowledge. Can I detect changes in water quality? Yes, regular measurements help to identify changes quickly. Do I have to calculate the values myself? No, the device displays the measurement directly and clearly. Is the meter suitable for regular checks? Yes, it has been designed for frequent and reliable measurements. Why should I use a digital meter? You get quick results and avoid inaccurate estimates or colour comparisons.

MW402 is a high range (TDS) portable conductivity meter with automatic temperature compensation.This meter is designed for aquariums, aquaculture, laboratories and water treatment applications to meet the needs of both hobbyists and professionals.It is also an excellent meter for food labs and water treatment applications.TDS tests provide a method for optimising chemical use and minimising operating costs.In aquariums and aquaculture, high concentrations of total dissolved solids (TDS) can affect water clarity and reduce photosynthesis of aquatic plants.A high TDS value can affect the clarity and taste of drinking water.The MW402 has a measuring range of 0.0 to 10.0 g/L (ppt) with a resolution of 0.1 g/L (ppt).This TDS meter comes complete with conductivity probe with 1 meter (3.3') cable and a calibration solution. Frequently Asked Questions What types of water samples is this meter suitable for? Ideal for water with a higher mineral or salt content, as well as many technical applications. Can I check the water quality quickly? Yes, the meter provides an easy-to-read reading within a few seconds. Is the meter suitable for regular measurements? Yes, it has been designed for frequent use and reliable results. Do I need experience with this type of equipment? No, it is easy to use and well suited even for beginners. Can I use the device in different locations? Yes, thanks to its compact design, it is easy to transport. How can I detect changes in the water? Regular measurements allow deviations to be identified quickly. Why is a digital measuring device worth it? You get quick results and avoid inaccurate estimates or comparisons.

This 3-in-1 low range combination meter allows you to measure pH, EC (conductivity) and TDS with a single meter and probe.It comes complete with the SE600 combined pH/EC/TDS probe, a 20 ml bag of pH 7.01 buffer solution, a 20 ml bag of 1413 µS/cm calibration solution, a 20 ml bag of 1382 ppm calibration solution, a 9 V battery and instructions.

This 3-in-1 combination meter allows you to measure pH, EC high range (conductivity) and TDS high range with a single meter and probe.It comes complete with the SE600 combined pH/EC/TDS probe, a 20 ml bag of pH 7.01 buffer solution, a 20 ml bag of 1413 µS/cm calibration solution, a 20 ml bag of 1500 ppm calibration solution, a 9 V battery and instructions.

Frequently Asked Questions Can I check multiple water parameters simultaneously with this device? Yes, you can measure pH, conductivity, TDS, and temperature with a single device. Is the meter suitable for aquariums and ponds? Yes, it helps you quickly check key water parameters and detect changes early on. Can I replace the probe if it wears out? Yes, the pH probe is replaceable, allowing you to continue using the device for a long time. Is the device suitable for outdoor use? Yes, the housing is waterproof and designed for both humid environments and outdoor use. Do I need to account for temperature myself when taking measurements? No, the device automatically compensates for temperature fluctuations to ensure reliable results. Is it easy for beginners to use? Yes, the measurement process is straightforward, and the readings are displayed directly on the screen. What applications is this meter best suited for? It is ideal for hydroponics, aquariums, pools, drinking water testing, and many other water analysis applications.

Frequently Asked Questions Is the device suitable for water with high mineral or nutrient concentrations? Yes, the MW804 is particularly well-suited for water with higher conductivity and TDS levels. Do I need multiple devices for different water parameters? No, pH, conductivity, TDS, and temperature are all measured with a single device. Is the meter suitable for hydroponics and nutrient solutions? Yes, it was designed to reliably monitor key water parameters in nutrient solutions. Can I replace the pH probe if necessary? Yes, the probe is replaceable. This saves costs in the long run and extends the device's service life. Is the device easy to use? Yes, the readings are clearly displayed, and the device is quick to learn. Can I use the meter outdoors? Yes, the robust, water-resistant housing makes it well-suited for outdoor use. Do I need to account for water temperature during measurement? No, the device automatically compensates for temperature fluctuations to ensure the most accurate readings possible.

This MW805 MAX pH/EC/TDS/Temp. 4-in-1 combo meter allows you to measure pH, EC (conductivity), TDS and Temp. with a single meter and one single probe.DESIGN FEATURESpH, conductivity / nutrient EC, TDS (ppt) with automatic temperature compensationSelectable TDS factors from .40 to 0.8; defaulet value 0.50Stability indicator prompting the user when the readings stabilizeDedicated GLP key to store and recall data on system statusA replaceable, Amplified Combination pH/EC/TDS/Temp probe with a single 1 meter cable for easy use (MA852D/1 probe included)A cloth junction on the pH sensor to reduce contamination when measuring fertilizer solutions. Gel filled for long lasting measurmentsA light weight and portable form factor at just 260g with battery and just over 7,62cm wideA large easy to read displayFactory calibration for Temperature and simple, highly accurate, single cell automatic, one point calibration for EC and an automatic up to 5 point calibration for pHIP 67 rated rugged case built for field or lab applicationsSpecialized design for hydroponic, aquaponic, and greenhouse growers

This High Range MW806 MAX pH/EC/TDS/Temp. 4-in-1 combo meter allows you to measure pH, EC (conductivity), TDS and Temp. with a single meter and one single probe.DESIGN FEATURESpH, conductivity / nutrient EC, TDS (ppt) with automatic temperature compensationSelectable TDS factors from 0.40 to 0.8; defaulet value 0.50Stability indicator prompting the user when the readings stabilizeDedicated GLP key to store and recall data on system statusA replaceable, Amplified Combination pH/EC/TDS/Temp probe with a single 1 meter cable for easy use (MA852 probe included)A cloth junction on the pH sensor to reduce contamination when measuring fertilizer solutionsGel filled for long lasting measurmentsA light weight and portable form factor at just 260g with battery and just over 7,62cm wideA large easy to read displayFactory calibration for Temperature and simple, highly accurate, single cell automatic, one point calibration for EC and an automatic up to 5 point calibration for pHIP 67 rated rugged case built for field or lab applicationsSpecialized design for hydroponic, aquaponic, and greenhouse growers

Frequently Asked Questions Is this meter suitable for drinking water? Yes, it is ideal for quickly testing drinking water and other water samples. Can I check the water quality myself? Yes, the meter displays a reading directly on the screen in just a few seconds. How does a TDS meter benefit me in everyday life? You can quickly tell if the composition of your water has changed. Is the device also suitable for aquariums or reverse osmosis systems? Yes, many users employ it to monitor aquarium and filtered water. Do I need to take special care of the device after each use? No, it is usually sufficient to rinse the measuring tip briefly after use. Can the device get wet? Yes, the casing is waterproof and designed for use around water. Is it complicated to use? No, the device is easy to use and is also suitable for beginners.

Frequently Asked Questions Can I quickly see if my water is clean enough using this device? Yes, it displays the amount of dissolved substances in the water directly. Is the meter suitable for pools and aquariums as well? Yes, it is ideal for aquariums, pools, water treatment, and similar applications. Do I need to worry about inaccurate readings due to temperature fluctuations? No, automatic temperature compensation ensures stable results. How often do I need to calibrate the device? A simple 1-point calibration—performed occasionally depending on usage—is sufficient. What happens if the probe gets dirty over time? It can be easily cleaned or replaced if necessary. Can I use the device outdoors? Yes, it is waterproof and suitable for outdoor use. Is the device easy to use, even without prior experience? Yes—simply dip it in, read the result, and you're done; it’s very straightforward.

High-quality conductivity meter for conductivity monitoring Our innovative conductivity meter has been specially developed for monitoring conductivity in ultrapure water (demineralised water) and has a 4-20 mA signal output that enables easy integration into higher-level control systems.The measurements are temperature-compensated, which ensures greater accuracy. With a measuring range of 0 to 2 µS/cm, our device is particularly suitable for monitoring low conductivities, such as those typically found in mixed-bed ion exchanger cartridges. The limit value is displayed by means of 2 LEDs (green/red) on the top of the device. An acrylic glass cover ensures that the current status is immediately visible. The device has a ¾ screw thread, which can be customised for easy and safe installation. There is also the option of customisation in terms of the LEDs, including the measuring range and a private label. Our high-quality conductivity meter offers a reliable solution for conductivity monitoring in medical areas to fulfil the guidelines and recommendations of the DGSV. Our measuring device is also particularly suitable for mixed bed cartridge monitoring in the clinical environment. Standard LED configuration (1 green LED, 1 red LED): <0.5 µS/cm = green >0.5 µS/cm to <1.0 µS/cm = green/red flashing >1 µS/cm = red

Reliable Monitoring of Water Quality at Extremely Low Conductivity High-precision conductivity meter for ultrapure and process water The N-LF5R meter was developed for continuous monitoring of very low electrical conductivities in aqueous solutions. With a measuring range of 0–5 µS/cm, it delivers meaningful readings even with minimal conductivity changes. The integrated 3/4" screw-in measuring cell allows direct installation into the process flow. Its compact design and low power requirement via 9 V DC operation make the N-LF5R highly flexible. The robust IP65 housing protects the device against dust and splash water, ensuring reliable operation even under demanding conditions. Why precise conductivity measurement is particularly important in the low range Even slight deviations in conductivity can determine the quality of the final product or the safety of a system in many processes. The N-LF5R detects the smallest changes in the 0–5 µS/cm range, which can indicate contamination, material degradation, or process deviations. Benefits of the N-LF5R for monitoring ultrapure and process water The N-LF5R conductivity meter enables early detection of even minimal changes in conductivity in ultrapure and process water. This allows contamination, leaks, material leaching, or process deviations to be identified quickly before they lead to quality issues or equipment damage. The integrated screw-in measuring cell allows direct inline measurement, ensuring continuous and reliable readings without sampling. Combined with the robust IP65 housing, the device is ideal for permanent use in industrial applications where high measurement accuracy and operational reliability are critical. Frequently asked questions Are there other measuring ranges available? The standard measuring ranges can be found in the product's drop-down menu. If the measuring range you require is not listed, don't worry. Simply let us know and we will check whether we can configure the item to suit your needs. Are there other thread sizes available? If the desired connection thread is not listed, that's no problem. Let us know your desired thread and we will check whether we can configure the item for you with the appropriate thread. For enquiries, please contact our service department on +49 (0) 5121 7609 99 or at vertrieb@heylneomeris.de Is it possible to label the conductivity meter with my own company logo so that we can sell it ourselves in future? That's no problem. Please provide us with more detailed information so that we can process your enquiry. Please note that the price will change due to the increased effort involved and that the minimum purchase quantity for product labelling is 100 units.

The modular water treatment system was specially developed for the outpatient care sector. While retaining the overall geometry, the system can be adapted to the different degrees of water hardness in Germany, the quantities required in different outpatient centers, as well as to the initial water quality including any treatment steps on the part of the supplier. The modularity offers the decisive advantage that the overall concept can be adapted to the respective water type or composition as well as the treatment process of the supplier. Concept Demineralized water treatment for the outpatient sector Use of demineralized water in the outpatient sector Fully demineralized water (demineralized water) plays a central role in the outpatient medical sector, particularly in the reprocessing of medical devices, in laboratory applications and in the final rinse for mechanical instrument reprocessing. The aim is to avoid residues that could be caused by minerals, salts or other substances contained in tap water. For safe use, demineralized water must meet defined quality requirements: The conductivity must be below 0.1 µS/cm. This indicates that it contains almost no dissolved salts or ions. The silicate content must not exceed 0.4 g/l to avoid silicate deposits on medical instruments that could impair functionality or lead to hygienic risks. Only if these limit values are adhered to can residue-free and gentle reprocessing be guaranteed that meets the hygiene requirements in the outpatient sector. This is particularly relevant in dental practices, dermatology, endoscopy and in outpatient operating theatres, where deionized water is used for final rinsing or for steam generators in sterilization processes, among other things. The components used are listed below: Cabinet System separator Filter system (pre-filter & activated carbon filter) Softening system Reverse osmosis system Permeate tank 100 liters (volume can be adjusted) Pressure boosting station Two-stage mixed bed UV system (optional) Pyrogen filter (optional) Ring line in front of the mixing bed if the consumers are not removed to prevent contamination Brine lifting system (optional) Testomat 808 SIO2 (silicate measurement) Conductivity measurement NeoTecMaster (optional) Performance of the system Depending on the design of the system, 90 l, 150 l, 230 l or 300 l deionized water can be produced per hour. The capacity of the permeate tank can be adjusted, but must be positioned outside the cabinet due to the larger dimensions including the pressure booster station from a capacity of > 150 l/ (depending on the application). Shut-off via system separator The installation of a system separator is mandatory to protect the drinking water network from contamination by treated water or changes to the natural composition of the drinking water fed in due to its technical treatment. The system has an integrated system separator (type BA), which is located directly behind the Aqua-Stop of the water connection. Aqua-Stop (solenoid valve shut-off) An Aqua-Stop is a safety mechanism used in water supply systems to stop or limit the flow of water if a fault or leakage occurs. The Aqua-Stop is located directly behind the main water connection of the system as the first element. The associated solenoid valve is coupled with two sensors, one of which is integrated in the bottom tray of the cabinet and the second is located outside at the level of the tank and the pressure booster station. Filter The pre-filter section is a filter unit consisting of a pre-filter and an activated carbon filter. Its main purpose is to protect downstream softening and osmosis systems that could be damaged by impurities in the water. Water softener The water softener removes the hardness constituents (calcium and magnesium) from the drinking water and replaces them with sodium. The function is based on an ion exchange process and ensures that the reverse osmosis membranes are reliably protected against clogging. Reverse osmosis In reverse osmosis, the natural osmotic process is reversed. The softened water is pumped through a membrane under pressure, whereby the membrane only allows water molecules and very small molecules to pass through and retains larger particles such as salts, bacteria, fours and other impurities. The installed reverse osmosis has a retention rate of approx. 98% in relation to all substances dissolved in the water. Permeate tank The built-in round tank offers advantages in terms of stability, cleaning and space requirements. The uniform shape ensures that the water is treated and stored efficiently. The optimized tank geometry prevents the potential growth of microbiological contamination and thus meets the high requirements for media purity to a greater extent. Pressure booster station The pressure booster station ensures that the connected consumers are supplied with the required operating pressure and flow rate. This enables an optimized and needs-based media supply. Mixing bed The two-stage mixing bed (connected in series) is a so-called pole mixer. Due to the special composition of the resin contained in the cartridges, all dissolved substances remaining in the water are reliably removed. The resin used is highly effective against silicates, which have a particularly negative impact on the reprocessing of medical products. The mixing bed is also the first stage of the recirculation process when using the optionally available buffer tank system. Pyrogen filter A pyrogen filter is a special type of filter used in water treatment to remove pyrogens from the water. Pyrogens are substances that can cause an immunological reaction in the body, in particular an increase in body temperature. These are usually endotoxins that are released by bacteria such as Escherichia coli (E. coli). Water disinfection by UV irradiation The development of water disinfection using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They enable the removal of legionella, microbes, bacteria, viruses and protozoa while respecting the environment. Testomat® 808 SiO2 silicate measuring device A Testomat®808 SiO2 silicate is used for permanent silicate monitoring. The Testomat®808 SiO2 is a measuring instrument that is used to determine the silicate content in water. The use of the Testomat 808®SiO2 ensures reliable compliance with the limit value for SiO2 of 0.4 mg/l recommended by the DGSV and AKI. Conductivity measurement Continuous monitoring of conductivity in the range of 0-10 μS/cm on the second mixing bed. For the reprocessing of medical devices, a conductivity of <1 µS/cm is recommended for the water used for the cleaning & disinfection and sterilization process. The conductivity measurement used continuously monitors whether the conductivity falls below this value. NeoTecMaster® 5 inch with housing Data acquisition, visualization and processing are just some of the relevant topics in the field of modern water treatment. The networking of different measuring systems and their integration into process automation is an elementary component here. The NeoTecMaster® was specially developed for this task and is a manufacturer-independent multi-parameter system. Cabinet systems Only a minimum footprint of 1.60 m x 1 m is required for installation. The module consists of 2 cabinets, each 80 cm wide and 60 cm deep. It is possible to work with double hinged doors, resulting in a room depth of 1m due to the depth of 60cm and a double hinged door with a dimension of 40cm. The cabinets used are made of sturdy sheet steel modules and have a high-quality surface coating. Viewing window Viewing windows are installed in Rittal enclosures to provide an overview of the measurement technology. The use of viewing windows in Rittal enclosure systems has several advantages. They enable a visual inspection of the devices in the enclosure without having to open the enclosure. This facilitates the monitoring, maintenance and troubleshooting of components without compromising the integrity of the enclosure. The viewing windows are usually made of a transparent material such as glass. Notes: Viewing windows in Rittal enclosures are only available for single-leaf doors. If this option is selected, please note that the required minimum room depth increases from 100 cm to 140 cm.Abwasser Abführung über Solehebeanlage (optional) As an optional component, the treatment plant can be extended to include an integrated wastewater lifting unit, which pumps the generated and collected wastewater into the sewer system. The main wastewater volume flows here are the wastewater from the regeneration of the softening system and the concentrate from the reverse osmosis. Collecting tray The integrated drip tray is used to detect leaks and is therefore a safety device part of the cabinet systems.The optional components of the system:Viewing windowLighting Frequently Asked Questions For which facilities is the system intended? The system is designed for the outpatient care sector and is used in particular in outpatient clinics. Can I adjust the system to suit my local water conditions? Yes, it can be adapted to different water hardness levels and supply conditions. Thanks to its modular design, it can be adapted to different water hardness levels, varying demand volumes and the respective raw water quality. Different treatment stages carried out by water suppliers can also be taken into account, meaning the system can be flexibly tailored to the specific on-site conditions. What is the specific purpose of the treated water? It is used for the preparation of medical devices and hygienic rinsing processes. How is water quality monitored on an ongoing basis? Key parameters are measured continuously and monitored automatically. What role does the NeoTecMaster play in the system? It is used to display and monitor all relevant operating and water parameters. How flexible is the system when water demand increases? Its capacity and configuration can be adapted as required. What are the specific benefits of the integrated UV system? It helps to reliably reduce bacteria in the water. How is it prevented that water leaks out unnoticed? The integrated drip tray is used to detect leaks and thus acts as a safety feature.

Under-sink system– Compact Solutions for Pure Water Quality Undercounter systems are space-saving, efficient water treatment solutions designed for discreet installation beneath work surfaces. They are indispensable in sensitive environments such as medical technology, laboratory furniture, dental clinics, and the MedTec industry. These systems reliably deliver purified water – demineralized (DI) water – exactly where it's needed. Advantages of Under-sink system: Compact design for integration into furniture and workspaces Easy to incorporate into existing supply systems Reliable multi-stage water purification Hygienic dispensing options for medical applications Example from the HeylNeomeris Range: NeoPureMini – Multi-Stage Under-sink Diluat System Pre-assembled on a stable frame and ready to connect, the NeoPureMini is ideal for installation under lab benches, in dental offices, or in medical furniture modules. With multi-stage filtration (including activated carbon, fine filtration, and optional UV stage), it provides high-purity DI water for stringent hygiene requirements in the sterilization of medical instruments in outpatient centers, operating rooms, and clinics.

Our 4- or 8- channel system allows the processing of up to four or eight measurement signals. For this purpose, 4-20 mA/ RS232 as well as Modbus RTU are available as signal inputs. Based on the received data a visualization as well as a trend display takes place. Through modular addition of optional modules (slaves) the realization of popular control concepts is possible.Advantages:Simple operation Integration of the Testomat® device world Integration into the existing control cabinet, alternatively we offer our NeoTecMaster® housingModular function range expandable by NeoTec slave modules (measure, control, control)Available as installation variant or structure variant Contents: NeoTecMaster® 5 inch - 4 channel system (optionally expandable to 8 channels) with Modbus interface and RS232 input for data communicationNeoTec Slave 4-20mA module (inputs: 8x 20mA)NeoTecMaster® IP66 housing for 5" display, light grey with front foilUSB stick for NeoTecMaster® 8GBInstallation of NeoTecMaster® in housing incl. parameterisation and cabling of the NeoTecMaster®Universal power supply 24V/6A DC (100-240V AC) (144 Watt)

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

The XS REVIO is a professional portable multi-parameter meter that can be powered in three different ways (battery, PC, AC adapter). It has an illuminated color graphic display for excellent data visualization in all lighting conditions, also thanks to the possibility of automatically and manually adjusting the contrast and illumination of the display. Measurement of pH, mV, ORP, ISE, conductivity, TDS, salinity, resistivity, dissolved oxygen and temperature. Online help with setup and calibration allows easy and immediate use of the instrument. Simultaneous display of multiple parameters that can be selected by the operator. Automatic pH calibration with USA and NIST buffers up to 5 points and 5 user defined points. Automatic ORP calibration 1 point. Automatic conductivity calibration with up to 4 points and 1 user defined point. Adjustable reference temperature and selectable cell constant. Automatic O2 calibration up to two points (0% - 100%). Display of calibrated points with symbols. GLP functions: Date and time, display of calibration data and calibration period setting.Manual and automatic data logger with the possibility of downloading the data to a PC via micro USB.Display of measurement stability and possibility to select 3 stability levels. All processes are constantly monitored and signaled to the operator by the colored LED above the display and by self-diagnostic messages. The following pre-assembled case variants are available for selection: Variant 1: with digital electrode 201 T DHS, cell 2301T and polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable, in compact case (manufacturer's number: 50110952). Variant 2: with pH electrode 201T/3MT , 2301T cell (conductivity), polarographic oxygen sensor, built-in temperature sensor and 3 m fixed cable each, in compact case (manufacturer's number: 50110912)Variant 3: complete with pH electrode 201T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m, in compact case (manufacturer number: 50110922) Variant 4: complete with conductivity cell 2301T/3MT and polarographic sensor DO7/3MT, both with built-in temperature sensor and fixed cable 3m. Additionally S7-BNC cable and NT55 temperature sensor, each 3m cable, in compact case (manufacturer number: 50110942) Variant 5: with S7-BNC cable and NT55 temperature sensor, both 3m cable, in compact case (manufacturer number: 50110932) 

IP Protection: IP67 Manufacturer article number: 50014153