Parameters

Stress-free measurement - professional model Water quality analysis is repeatedly performed in laboratories on a daily basis. Our high-end benchtop model was developed to provide simplicity with excellent on-site usability - from operation and maintenance through to troubleshooting.Ideal for student training and routine applications. Good value for money: no bells and whistles that sounds good but is rarely used. From a renowned manufacturer whose company started with pH meters as early as 1945.Highly accurate pH and ORP measurements Automatic temperature compensation Accepts up to 6 pH calibration points Auto calibrates USA, NIST, & DIN pH buffers Displays offset & average slope Allows 1-point ORP calibration and temperature calibrationScope of delivery: Measuring device with integrated electrode stand Universal mains adapter with 6 plugs Operating instructions Starter set version additionally contains: 9625-10D refillable pH electrode with plastic body pH 4, 7 and 10 buffer solutions & 3.33M KCl (1 x 250ml each)with electrode holder Manufacturer article number:1300095720 (PH1500-SR)

High-end laboratory measuring instrument for analytics  Dear customers, herewith we offer you our highly professional Horiba laboratory table-top measuring instrument of the 2000 series.  The LAQUA 2000 series laboratory tabletop meter has a very high-quality 5 inch display with backlighting which shows you all the important information, such as the measured value with up to three decimal places (depending on the resolution), the temperature, the date with time and much more.  The LAQUA 2000 series also offers you an adequate device memory with automatic data storage after a set time interval to document your daily measurements accurately over a long period of time. To protect the device settings from unauthorised access, they are password-protected. After your measurements, you can easily transfer all measurement data from the device to your PC via a USB cable in CSV, Excel and Pdf formats using the DAS20 software.  In order to facilitate your daily work with the device, the table measuring device visualises the correct calibration, the stable measurement as well as the electrode wear condition. The operation is intuitive because the available keys are marked with symbols and abbreviations. After the analysis, you can clean the device easily and in a time-saving manner with a damp cloth, as the surface is dirt-repellent due to its nature. The electrode stand included in the starter set can be used to hold two electrodes and adjust their height. This allows you to individually align your electrode to your container or glass for calibration and measurement. Special features of the LAQUA PH2000 model: The PH2000 allows you to measure the pH- or ORP- valuepH-ORP wide measuring range; -2.000 to 20.000 pH  high accuracy; ± 0.003 pH  resolution: 0.1, 0.01 or 0.001 pH  continuous display of calibrated points  display of offset and slope - by segment and average up to 5 pH  calibration points ± 2000.0 mV  1-point redox calibration  automatically recognises and calibrates USA, NIST, NIST2 and DIN pH buffers  allows CUST (Custom) buffers for manual calibration  Below we would like to show you in full the general functions of the Horiba LAQUA 2000 series: internal memory for up to 2000 data sets, measurement data with time and date information records and stores data in the unit memory based on a specified time interval a 4-digit password protects the meter set-up mode from unauthorised access data can be transferred to a computer and exported in the following formats CSV/Excel/PDF GLP/GMP  compliance of the instrument as data can be displayed, recorded and printed with date and time stamp on the instrument Software updates can be downloaded to the instrument Calibration reminder function, indicates that it is time to calibrate (alarm adjustable up to 90 days) Electrode holder is mounted on the meter and can hold up to 2 electrodes (rotates 360º and can be moved up and down 30cm) Displays measurement stability in measurement and calibration mode displays electrode condition based on calibration data smooth surface, easy cleaning RS-232/USB, therefore easy PC and printer connection and free instrument software Ergonomic design for easy viewing and operation Clearly labelled and easy-to-use ports for communication and measurement 5" digital display with backlight, shows all important measurement values and status Automatic calibration, recognises a wide range of standard solutionsadjustable switch-off time (up to 30 minutes) temperature compensation, the temperature in °C or °F is either automatically detected if a temperature sensor is connected (ATC mode) or manually entered by the user several measuring modes: Auto-Stable mode signals a stable measured value,Auto-Hold mode holds a stable measured valueReal Time mode continuously displays current readings small meter footprint of 155 x 150 mm, saves valuable space Temperature detection, easy display of sample temperature user selectable resolution, up to 3 digits Fixed and individual calibration pointsEasy navigation, navigate through the settings menu by up, down, right and left Scope of delivery: Measuring device with integrated electrode standUniversal mains adapter with 6 plugs Operating instructions Starter set version additionally contains 9625-10D refillable pH electrode with plastic body pH 4, 7 and 10 buffer solutions & 3.33M KCl (1 x 250ml each) with electrode holder Manufacturer part number:Meter only   PH2000 (3200896829) Starter-set   PH2000-SR (1300098880)

Thank you for your interest in our smart and customizable Horiba WQ-300 series instruments.The high-quality digital multi-parameter handheld meters with their generous color LCD display with LED backlight (7 cm x 5.2 cm) are ideally suited for use in the field under all conditions and in direct daylight.Use our configurator to freely select the suitable measuring device of the WQ-300 Horiba series (1 to 3 channels), the measuring parameters (sensor cartridges) and desired cable length (with integrated sensor receptacle + digital module) according to your wishes and requirements. At a later stage, you can always connect another available measurement parameter to the device via the corresponding sensor cable or carry it in the case as a supplement. As with other handheld measuring devices from Horiba, a major advantage of these devices is that the measuring devices are highly resistant to shock, slipping and scratching thanks to a special rubber coating. Only four standard AA 2500 mAh batteries are required for operation, and to give you more flexibility when you are on the move, the WQ-300 series devices can also be powered by a powerbank or battery pack via the integrated USB interface. The IP67 certification, which certifies dustproofness and protection against temporary submersion for up to 30 minutes at a water depth of one meter, completes the overall professional package, along with the usual ergonomic design and ease of user operation.  Horiba attests to its outstanding product quality by offering a three-year warranty on the LAQUA WQ-300 series handheld meters. Other added values and features:During analyses, the user is supported by the display of operating instructions in the form of smiley icons, which is supplemented by an LED status display on the sensor. This is intended to prevent operating errors, which can lead to implausible measurement results. The design decision to install only a small number of control buttons and not to implement any nested user menus serves to ensure that the devices can be operated easily and safely even during discontinuous use as well as when used by other users.  The measuring instruments have an electrode wear indicator, a measuring stability indicator on the instrument and sensor, a locking function to "save" the currently measured value on the display, free naming of the measuring point (8 characters), automatic calibration functions, integrated sensor holders, self-diagnosis function, as well as GLP functions. The fold-out stand on the back of the instruments means that you always have your hands free to carry out your measurements easily and safely. Measurement data can be conveniently transferred to your computer or cell phone via USB or WiFi.All handheld meters of the 300 series are delivered in a reinforced measuring case for mobile use in the open air. This provides space for the meter, for electrodes and cables, for up to eight 60 ml bottles of buffer solutions including an integrated buffer solution bottle holder for easier calibration. Particularly noteworthy is the automatic sensor recognition of the instrument through the use of sensor cables with integrated digital sensor recording. Information about the sensor, calibration data as well as measurement settings are stored in the sensor recording and transmitted to the measuring instrument. In addition, calibration of all connected sensors is possible at the same time, since each sensor head independently stores the measurement and calibration data and transmits it to the WQ300 series measuring device.Optionally, there is the possibility to connect and use analog sensors via the Horiba BNC sensor adapter with the device, please contact us for this.Languages:GermanEnglishFrenchSpanishPortugueseChineseScope of delivery:WQ-300 series handheld meter in a carrying casethe digital electrode you have chosen, if applicable, and the corresponding sensor-specific cable with integrated digital sensor receptaclemanualManufacturer article number single measuring device WQ-310-K 1 channel: 3200832605 Note: Chloride sensor, if selected, is supplied without chloride ion strength regulator and chloride electrode filling solution. This must be procured by the customer. Without the filling solution the sensor can´t be used. Why We Use These Measuring Devices in Water Treatment Precise calcium control is a key element of efficient water treatment – from drinking water purification and process water management to environmental analysis. Elevated calcium levels can lead to scaling, pipe damage, energy losses, and disruptions in chemical processes. For this purpose, we offer tailored high-end solutions from the Horiba LAQUA WQ Series (WQ310-K, WQ320-K, WQ330-K) in our online shop, specifically designed to meet the needs of water technology:  WQ310-K: Single-parameter solution for targeted measurements • WQ320-K: Simultaneous monitoring of, for example, calcium and conductivity • WQ330-K: Three-channel measurement for complex real-time multi-parameter analyses Why We Rely on These Devices: • They provide reliable data for controlling and optimizing water treatment systems • They offer digital evaluation, documented results, and interfaces for process integration • They are robust, packaged in a practical analysis case, and thus also suitable for mobile on-site use • They allow calcium to be measured in combination with other parameters such as pH, conductivity, or redox – for a holistic and efficient approach

Thank you for your interest in our smart and customizable Horiba WQ-300 series instruments.The high-quality digital multi-parameter handheld meters with their generous color LCD display with LED backlight (7 cm x 5.2 cm) are ideally suited for use in the field under all conditions and in direct daylight.Use our configurator to freely select the suitable measuring device of the WQ-300 Horiba series (1 to 3 channels), the measuring parameters (sensor cartridges) and desired cable length (with integrated sensor receptacle + digital module) according to your wishes and requirements. At a later stage, you can always connect another available measurement parameter to the device via the corresponding sensor cable or carry it in the case as a supplement. As with other handheld measuring devices from Horiba, a major advantage of these devices is that the measuring devices are highly resistant to shock, slipping and scratching thanks to a special rubber coating. Only four standard AA 2500 mAh batteries are required for operation, and to give you more flexibility when you are on the move, the WQ-300 series devices can also be powered by a powerbank or battery pack via the integrated USB interface. The IP67 certification, which certifies dustproofness and protection against temporary submersion for up to 30 minutes at a water depth of one meter, completes the overall professional package, along with the usual ergonomic design and ease of user operation.  Horiba attests to its outstanding product quality by offering a three-year warranty on the LAQUA WQ-300 series handheld meters. Other added values and features:During analyses, the user is supported by the display of operating instructions in the form of smiley icons, which is supplemented by an LED status display on the sensor. This is intended to prevent operating errors, which can lead to implausible measurement results. The design decision to install only a small number of control buttons and not to implement any nested user menus serves to ensure that the devices can be operated easily and safely even during discontinuous use as well as when used by other users.  The measuring instruments have an electrode wear indicator, a measuring stability indicator on the instrument and sensor, a locking function to "save" the currently measured value on the display, free naming of the measuring point (8 characters), automatic calibration functions, integrated sensor holders, self-diagnosis function, as well as GLP functions. The fold-out stand on the back of the instruments means that you always have your hands free to carry out your measurements easily and safely. Measurement data can be conveniently transferred to your computer or cell phone via USB or WiFi.All handheld meters of the 300 series are delivered in a reinforced measuring case for mobile use in the open air. This provides space for the meter, for electrodes and cables, for up to eight 60 ml bottles of buffer solutions including an integrated buffer solution bottle holder for easier calibration. Particularly noteworthy is the automatic sensor recognition of the instrument through the use of sensor cables with integrated digital sensor recording. Information about the sensor, calibration data as well as measurement settings are stored in the sensor recording and transmitted to the measuring instrument. In addition, calibration of all connected sensors is possible at the same time, since each sensor head independently stores the measurement and calibration data and transmits it to the WQ300 series measuring device.Optionally, there is the possibility to connect and use analog sensors via the Horiba BNC sensor adapter with the device, please contact us for this.Languages:GermanEnglishFrenchSpanishPortugueseChineseScope of delivery:WQ-300 series handheld meter in a carrying casethe digital electrode you have chosen, if applicable, and the corresponding sensor-specific cable with integrated digital sensor receptaclemanualManufacturer article number single measuring device WQ-320-K 2 channel: 3200832606 Note: Chloride sensor, if selected, is supplied without chloride ion strength regulator and chloride electrode filling solution. This must be procured by the customer. Without the filling solution the sensor can´t be used.

Horiba WQ330-K – Your Professional 3-Channel Water Quality Meter Expandable multi-parameter system for simultaneous measurement of pH, conductivity, redox, and other water parameters The Horiba LAQUA WQ330-K is a powerful multi-channel device for advanced water analysis, both on-site and in the laboratory. With three freely configurable measurement channels, it can simultaneously record parameters such as pH, conductivity, redox potential, TDS, temperature, oxygen, ammonia, calcium, chloride, nitrate, fluoride, and potassium. Intuitive operation, automatic sensor recognition, and digital calibration ensure accurate, fast, and reproducible measurements. Flexible Multi-Parameter System for Field and Laboratory Applications The analysis kit with the Horiba WQ330-K is ideal for environmental and water body monitoring, research and teaching, as well as drinking and process water control. The large LCD display with LED backlight ensures excellent readability even in direct sunlight. Measurement data can be exported and documented via USB or wirelessly, greatly simplifying traceability and analysis. The modular system allows the device to be quickly and precisely adapted to any measurement task. It is ideal for users who need to efficiently and reliably monitor multiple water parameters. Technical Features and Key Advantages of the WQ330-K The three measurement channels of the Horiba WQ330-K enable simultaneous recording of different water parameters, reducing measurement time and allowing better evaluation of relationships between parameters. The modular sensor concept allows flexible use of digital sensors, which are automatically recognized and store their calibration history. Notably, the combination of high measurement precision, user-friendliness, and mobility makes this device stand out. Quick deployment without complicated setup, along with easy data transfer for documentation and analysis, makes the Horiba LAQUA WQ330-K an ideal solution for professional water analytics. Frequently asked questions How long is the warranty period for HORIBA analysers? The warranty period is 2 years for the 300 (WQ) series and 1 year for the F series after delivery. Where can I find suitable replacement electrodes or buffer solutions? You can find the appropriate replacement electrodes and buffer solutions in the shop under the main item at the bottom of the cross-selling section. How do I clean the probe before calibration? The sensors should be cleaned with DI water (deionised). After cleaning, wipe them with tissue paper if possible.

Manufacturer Part No. 3999960126 LAQUAtwin EC-22: The world's first pocket-sized conductivity meter Your mobile laboratory - for use on site: Ideal for water quality tests in aquariums, food and many other applications. HORIBA's unique compact meter integrates electrode, display and sample container to enable simple, effective on-site testing by direct measurement with a single drop. Minimum sample volume: 0.12 ml Up to 3 calibration points Conductivity and temperature display Automatic range Automatic calibration Automatic standard detection: 1413µS/cm, 12.88mS/cm, 111.8mS/cm Automatic temperature compensation: 2%/ºC fixed Temperature calibration: 5 to 40.0 ºC Automatically stable / automatically held measurement Automatic switch-off: 30 min. Low battery indicator IP67 rating dust and waterproof Replaceable sensor 400 hours battery life: continuous operation without backlight Materials: ABS epoxy housing and titanium coating with platinum black sensor Display: customised (monochrome) LCD with backlight Operating conditions: 5 to 40°C, 85% or less relative humidity Warranty: 2 years - meter, 6 months - sensor Packed in a practical carrying case Supplied with 1413µS/cm & 12.88mS/cm conductivity standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instructions and quick reference guide Additional information We would like to inform you of an upcoming product update for the LAQUAtwin handheld analysers. To enhance product safety and prevent infants and young children from accidentally swallowing the batteries, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for enhanced safety. Reason: To prevent accidental swallowing of batteries. Production date: From January 2026 in Japan Deliveries to EMEA distribution partners: From March 2026 As this change is currently being rolled out, mixed deliveries of the current and updated versions may occur during the transition period.

Manufacturer Part No. 3999960127 LAQUAtwin EC-33: The world's first pocket-sized conductivity meter Your mobile laboratory - for use on site: Ideal for water quality tests in aquariums, food and many other applications. HORIBA's unique compact meter integrates electrode, display and sample container to enable simple, effective on-site testing by direct measurement with a single drop. Minimum sample volume: 0.12 ml Up to 3 calibration points Conductivity, TDS and temperature display Automatic range Automatic calibration Automatic standard detection: 1413µS/cm, 12.88mS/cm, 111.8mS/cm Automatic temperature compensation: 2%/ºC fixed Temperature calibration: 5 to 40.0 ºC 4 curves for the total dissolved solids content: TDS factor 0.4 to 1.0, EN 27888, 442, NaCl Automatically stable / automatically held measurement Automatic switch-off: 30 min. Low battery indicator IP67 rating dust and waterproof Replaceable sensor 400 hours battery life: continuous operation without backlight Materials: ABS epoxy housing and titanium coating with platinum black sensor Display: customised (monochrome) LCD with backlight Operating conditions: 5 to 40°C, 85% or less relative humidity Warranty: 2 years - meter, 6 months - sensor Packed in a practical carrying case Supplied with 1413µS/cm & 12.88mS/cm conductivity standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, drops, instructions and quick reference guide Horiba LAQUAtwin – Mobile Precision for Water Treatment The compact Horiba LAQUAtwin pocket testers deliver fast, accurate and user‑friendly on‑site measurement of key water parameters—directly from a single droplet. In the HeylNeomeris online shop, you’ll find carefully selected models designed for professional use in water treatment, environmental analysis, aquaculture, and laboratory routines. Why LAQUAtwin Devices Excel in Water Treatment: Ultra‑low sample volume: only 0.05 mL per measurement Rapid results: ideal for mobile checks and spot analyses Laboratory‑grade accuracy in a pocket‑sized instrument Effortless operation: no special training required IP67‑rated housing: waterproof, dustproof, and rugged for field use Key Applications in Water Treatment: Quick screening in drinking water testing or process water quality control Routine monitoring of parameters such as pH, conductivity, calcium, sodium, or nitrate Interim checks in laboratories or treatment plants where bench‑top instruments aren’t practical Perfect for service technicians, field engineers, and operators of small‑scale systems Sample Models Available in the HeylNeomeris Shop: Horiba LAQUAtwin pH‑11 – precision pH measurement Horiba LAQUAtwin EC‑33 – conductivity monitoring Horiba LAQUAtwin Na‑11, Ca‑11, NO₃‑11 – targeted ion analysis for sodium, calcium, and nitrate Additional information We would like to inform you of an upcoming product update for the LAQUAtwin handheld analysers. To enhance product safety and prevent infants and young children from accidentally swallowing the batteries, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for enhanced safety. Reason: To prevent accidental swallowing of batteries. Production date: From January 2026 in Japan Deliveries to EMEA distribution partners: From March 2026 As this change is currently being rolled out, mixed deliveries of the current and updated versions may occur during the transition period.

HORIBA pH Handheld Tester – Ideal for Water and Environmental Analysis Precise pH measurements on-site – compact, reliable, and easy to use The Horiba LAQUAtwin pH tester is ideal for water quality testing in rivers, drinking water, and process water. With a measurement range of 0.0 to 14.0 pH and a 2-point calibration, the tester is suitable for a wide range of pH analyses. Just a single drop of sample provides quick and reliable measurement results. The tester combines electrode, display, and sample container in a robust IP67-rated housing that is dust- and waterproof. The digital display with backlight shows both pH and mV values. Features such as automatic stability detection and Auto-Hold simplify operation. With up to 400 hours of battery life, the tester is suitable for extended measurement series. Included are calibration buffer solutions (pH 4.01 & 7.00), batteries, pipette, instruction manual, and a carrying case. Handheld pH tester for fast and precise results With its wide measurement range and 2-point calibration, the Horiba LAQUAtwin pH tester is suitable for a variety of pH analyses. Even a single drop of sample is enough to obtain fast and accurate results. Its compact design makes the mobile pH tester highly user-friendly and allows on-site measurements without complex sample preparation or laboratory infrastructure. Robust, waterproof design with comprehensive features The tester integrates the electrode, display, and sample container in a robust IP67-rated housing that is dust- and waterproof. The digital backlit display clearly shows pH and mV values. Features like automatic stability detection and Auto-Hold simplify daily use. With a battery life of up to 400 hours, the tester is suitable for long measurement series. The package includes calibration buffer solutions (pH 4.01 & 7.00), batteries, pipette, instruction manual, and a practical carrying case. Typical applications of the Horiba LAQUAtwin pH Pocket Tester Aquaculture and corals Aquariums Beer, beverages, and food Heating systems Laboratories and schools Horticulture Water treatment Additional information We would like to inform you of an upcoming product update for the LAQUAtwin handheld analysers. To enhance product safety and prevent infants and young children from accidentally swallowing the batteries, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for enhanced safety. Reason: To prevent accidental swallowing of batteries. Production date: From January 2026 in Japan Deliveries to EMEA distribution partners: From March 2026 As this change is currently being rolled out, mixed deliveries of the current and updated versions may occur during the transition period. Frequently asked questions How long is the warranty period for HORIBA pocket testers? The warranty period is two years from delivery for commercial customers. How many measurements can be taken before the sensor needs to be replaced? This varies depending on the application, use and storage of the Horiba tester. As a rule, the sensor should be replaced after one year. How long is the warranty period for replacement sensors for pocket testers? The warranty period is 12 months after delivery for commercial customers. How do you clean the pocket tester? The pocket tester can be rinsed under water. We recommend cleaning with DI water (deionised). Tissue paper is recommended for drying after cleaning. How can the pocket tester be reset to factory settings? (e.g. in the event of an incorrect measurement result) This information can be found in the operating instructions. These can be found in the download area of the shop and on the product. Is calibration necessary before each measurement? Basically, yes. Further information can be found in the operating instructions.

Mobile pH Tester with 3-Point Calibration for On-the-Go Use Horiba LAQUAtwin pH Tester – ideal for water and environmental analysis The Horiba LAQUAtwin pH Tester pH-22 is compact, robust, and designed for mobile use. With up to three calibration points and a measurement range of 0.00 to 14.00 pH, this device delivers high precision and reliability. Direct measurement with just a single drop of sample provides fast results. Features such as automatic buffer recognition, temperature compensation, and Stabil/Hold functionality make daily operation simple and convenient. Mobile precision pH tester for reliable on-site measurements The tester combines electrode, display, and sample container in a dust- and waterproof IP67 housing, making it ideal for field and laboratory applications. The digital backlit display shows pH and mV values clearly and accurately. Automatic shut-off and battery status indicators ensure convenient operation. The package includes calibration buffer solutions (pH 4.01 and 7.00), batteries, a pipette, and a quick-start guide. Why accurate pH measurement is critical – and why a handheld tester is ideal pH is a key parameter in water, environmental, and process analysis because it significantly influences chemical reactions, biological processes, and material stability. Even small deviations can substantially impact water quality, product quality, or process safety. A mobile handheld pH tester allows fast, reliable measurements directly on site. Changes can be detected immediately, and corrective actions implemented without delay. The Horiba LAQUAtwin pH-22 combines this flexibility with high measurement precision, making it ideal for field, laboratory, and routine applications. Typical applications for the Horiba LAQUAtwin pH handheld tester Aquaculture and coral monitoring Beer, beverage, and food production Heating systems Laboratories and schools Environmental analysis Water treatment Horticulture Additional information We would like to inform you of an upcoming product update for the LAQUAtwin handheld analysers. To enhance product safety and prevent infants and young children from accidentally swallowing the batteries, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for enhanced safety. Reason: To prevent accidental swallowing of batteries. Production date: From January 2026 in Japan Deliveries to EMEA distribution partners: From March 2026 As this change is currently being rolled out, mixed deliveries of the current and updated versions may occur during the transition period. Frequently asked questions How long is the warranty period for HORIBA pocket testers? The warranty period is two years from delivery for commercial customers. How many measurements can be taken before the sensor needs to be replaced? This varies depending on the application, use and storage of the Horiba tester. As a rule, the sensor should be replaced after one year. How long is the warranty period for replacement sensors for pocket testers? The warranty period is 12 months after delivery for commercial customers. How do you clean the pocket tester? The pocket tester can be rinsed under water. We recommend cleaning with DI water (deionised). Tissue paper is recommended for drying after cleaning. How can the pocket tester be reset to factory settings? (e.g. in the event of an incorrect measurement result) This information can be found in the operating instructions. These can be found in the download area of the shop and on the product. Is calibration necessary before each measurement? Basically, yes. Further information can be found in the operating instructions.

Manufacturer Part No. 3999960124 LAQUAtwin PH-33: The world's first pocket-sized PH meter Your mobile laboratory - for use on site: Ideal for water quality testing in aquatic, drinking and process water and many other applications. HORIBA's unique compact meter integrates electrode, display and sample container to enable simple, effective on-site testing by direct measurement with a single drop. Minimum sample volume: 0.1 ml (0.05 ml with sampling sheet B) Up to 5 calibration points pH, mV and temperature display Automatic calibration Automatic buffer recognition: USA & NIST pH buffers Automatic temperature compensation Temperature calibration: 5 to 40.0 ºC Automatic stable / automatic hold measurement Automatic switch off: 30 min. Low battery indicator IP67 rating dust and waterproof Replaceable sensor 400 hours battery life: continuous operation without backlight Material: ABS epoxy Display: customised (monochrome) LCD with backlight Operating conditions: 5 to 40°C, 85% or less relative humidity Warranty: 2 years - meter, 6 months - sensor Packed in a practical carrying case Supplied with pH 4.01 & 7.00 buffers (14ml each), 2 x CR2032 batteries, dropper, instructions and quick reference guide Additional information We would like to inform you of an upcoming product update for the LAQUAtwin handheld analysers. To enhance product safety and prevent infants and young children from accidentally swallowing the batteries, HORIBA will be introducing a new battery cover on all LAQUAtwin pocket-sized analysers. Overview of the product change Change: Battery cover for enhanced safety. Reason: To prevent accidental swallowing of batteries. Production date: From January 2026 in Japan Deliveries to EMEA distribution partners: From March 2026 As this change is currently being rolled out, mixed deliveries of the current and updated versions may occur during the transition period.

The original solution should be used as it is. For general use as standard solution sets, 101-S (100-4.7.9 and #310 internal solution) are also available. Manufacturer article number:3200043639 (100-2)

The original solution should be used as it is. For general use as standard solution sets, 101-S (100-4.7.9 and #310 internal solution) are also available. Manufacturer article number:3200043637 (100-7)

The original solution should be used as it is. For general use as standard solution sets, 101-S (100-4.7.9 and #310 internal solution) are also available. Manufacturer article number:3200043636 (100-9)

Horiba pH6.86 (500 ml), pH4 (250 ml) and pH9.18 (250 ml) buffer solution (101-S) Reference electrode Internal solution #300 (250 ml) / dropper Use undiluted.The set contains standard and internal solutions, as shown. Manufacturer article number:3200043642 (101-S)

Der Milwaukee C65 Waterproof EC Pen bringt robuste Technik für präzise Leitfähigkeitsmessungen im niedrigen Bereich. Automatische Temperaturkompensation (ATC) sorgt für verlässliche Messergebnisse bei wechselnden Bedingungen. Dank wasserdichtem Gehäuse und austauschbarer Sonde ist das Gerät ideal für den Outdoor-Einsatz, Labor oder Messungen in feuchten Umgebungen.

Der Milwaukee C66 Waterproof EC Pen überzeugt durch Robustheit und hohe Messbereiche. Mit ATC und Austauschsonde liefert er auch bei extremen Bedingungen präzise Leitfähigkeitswerte. Ideales Werkzeug für Aquaristik, Industrie oder Feldarbeit – langlebig, zuverlässig und leicht zu bedienen.

Milwaukee CD600 TDS-Tester – misst zuverlässig die Konzentration gelöster Feststoffe (TDS). Kristallklare Anzeigen, einfache Handhabung. Zuverlässig für Wasserqualitätskontrolle, Umweltanalyse & Hydroponik. Kompakt, präzise, praxistauglich.

Milwaukee CD601 EC-Pen – handliches Leitfähigkeitstool für schnelle & verlässliche Messungen. Messbereich 0–1990 µS/cm, Auflösung 10 µS/cm, mit ATC (Automatische Temperaturkompensation); Genauigkeit ±2 % FS. Einfache 1-Punkt-Kalibrierung, robust, ideal für Aquarien, Wasseranalysen & Feldmessungssituationen.

Der Milwaukee CD610 ist ein präziser TDS-Tester für Anwendungen im hohen Messbereich. Er ermittelt zuverlässig die Konzentration gelöster Feststoffe (Total Dissolved Solids) im Wasser und eignet sich ideal für industrielle Umgebungen, Aquakultur, Landwirtschaft oder Wasseraufbereitung mit hohem Mineralgehalt. Das kompakte, handliche Design ermöglicht eine einfache Bedienung, während die robuste Bauweise für langlebige Einsatzfähigkeit sorgt. Dank seines weiten Messbereichs ist der CD610 die perfekte Wahl, wenn Standard-TDS-Tester an ihre Grenzen stoßen.

Milwaukee CD611 Leitfähigkeitstester – ideal für präzise Leitfähigkeitsmessung im mittleren bis hohen Bereich. Automatische Temperaturkompensation sorgt für verlässliche Resultate. Robust konstruiert und leicht bedienbar – perfekt für Labor oder Außeneinsatz.

Milwaukee CD97 TDS-Pen – spezialisiert auf niedrige Konzentrationen gelöster Feststoffe. Extrem feine Auflösung & Sensitivität, ideal für Reinwasser- & Laboranwendungen. Schnell, exakt und ideal für hohe Ansprüche an Genauigkeit.

This Nutrient Meter is designed for Hydroponics, horticulture and agriculture to help you make sure that your vegetables and plants are receiving the right amount of nutrient to promote healthy growth with low to zero product waste. Keep EC/TDS in your target range to help your achieve better results.- Readings are displayed with 20 LEDs graph bar- Range 0.2 to 4 mS/cm- The alarm feature is user settable and is displayed on the LED bar- No calibration required- Auto-ON/OFF function- The auto-check feature indicates the battery level- Waterproof and floating design makes the stick an appropriate tool for stirring nutrient solutions in a bucket/tank- Graphite EC probe with ATC

Der EC59 von Milwaukee ist ein vielseitiger, wasserdichter Tester zur Messung von Leitfähigkeit (EC), gelösten Feststoffen (TDS) und Temperatur. Mit automatischer Temperaturkompensation und einer wechselbaren Sonde ausgestattet, eignet er sich für Anwendungen in Wasseraufbereitung, Aquakultur und Hydroponik. Seine robuste Bauweise und einfache Bedienung machen ihn zum zuverlässigen Begleiter im Alltag.

Das Milwaukee EC60 ist die ideale Lösung für Messungen mit hohem Leitfähigkeitsbereich. Es kombiniert EC-, TDS- und Temperaturmessungen in einem wasserdichten Gerät und bietet automatische Temperaturkompensation. Die austauschbare Sonde sorgt für lange Einsatzdauer. Optimal für industrielle Anwendungen oder Umgebungen, in denen besonders hohe Salz- oder Mineralgehalte zu messen sind.