1 pallet - MB A6K4 "disposable quality" mixed bed resin (no VOC)
Product number:
896497
Packaging unit:
1 pallet (1050 litres - 42 bags)
MB A6K4 is a high capacity mixed bed ion exchange resin consisting of a mixture of strongly basic anion resin and a strongly acidic cation resin for direct water purification.The conductivity is about 0.06 µm/cm.Suitable for use in non-regenerable cartridges, high efficiency deionisation for silica removal and ultra pure water applications.Packed in 25 litre bagsPolymer matrix: gel polystyrene cross-linked with DVB.Ionic form, as supplied: H+ / OH-Physical shape and appearance: Spherical beadsSphericity: Min. 95%Particle size range (US Standard Screen): 1.25 - 0.315mm, wet.Particle size: +1.2mm < 5% ; -0.3mm < 1%Water retention H+: 45 - 50%Water retention OH-: 53 - 60%Shipping weight (approx.): 700-740 g/lMax. Temp. non-regenerative: 100°CMax. Temp. regenerative: 60°CpH-value range: 0-14Recommended operating conditions:Minimum bed depth should be 0.6m (24")Service flow rate should be 20-60 BV/hourProlonged exposure to strong oxidising agents such as chlorine, hydrogen peroxide and concentrated nitric acid will deteriorate the structural backbone of the resin and should be avoided.Mixture Resin:Anions: 60%Cations: 40%Purchase options:Single purchase - 25 ltr. (item no. 896495)1/2 pallet - 500 ltr. (Art.-No. 896496)1 pallet - 1050 ltr. (art.-no. 896497)
Content: 1050 Liter (€5.40* / 1 Liter)
€5,666.00*
1 pallet salt tablets (100x 10kg), EN 973 A
Product number:
896498
Packaging unit:
1 pallet (1000 kilograms - 100 bags)
Proposed use: for the regeneration of water softeners
Composition: evaporated salt (min. 99.9% NaCl)
Dimensions / weight of tablet: ø25mm / 14g
Moisture content: < 0.08
Filling weight: 10kg per sack
Type of packaging: PE film
Storage description: store dry and well closed
Certifications: ISO 9001, ISO 14001 and IFS
Standard: The product complies with the following standards.
EN 973:2009
Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A
EN 16401:2013
Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A
EN 14805:2022
Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1
EN 16370:2022
Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2
Purchase options:
Single purchase: 1x 10kg sack (Art.-No. 896467)
Pallet purchase: 100x 10kg sacks (Art.-No. 896498)
€1,147.00*
1 pallet salt tablets (40x 25kg), EN 973 A
Product number:
896500
Packaging unit:
1 pallet (1000 kilograms - 40 bags)
Proposed use: for the regeneration of water softeners
Composition: evaporated salt (min. 99.9% NaCl)
Dimensions / weight of tablet: ø25mm / 14g
Moisture content: < 0.08
Filling weight: 25kg per sack
Type of packaging: PE film
Storage description: store dry and well closed
Certifications: ISO 9001, ISO 14001 and IFS
Standard: The product complies with the following standards...
EN 973:2009
Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A
EN 16401:2013
Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A
EN 14805:2022
Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1
EN 16370:2022
Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2
Purchase options:
Single purchase: 1x 25kg sack (Art.-No. 896468)
Pallet purchase: 40x 25kg sacks - 1000 kg (Art.-No. 896500)
€519.00*
1/2 pallet - MB A6K4 "disposable quality" mixed bed resin (no VOC)
Product number:
896496
Packaging unit:
1/2 pallet (500 litres - 20 bags)
MB A6K4 is a high capacity mixed bed ion exchange resin consisting of a mixture of strongly basic anion resin and a strongly acidic cation resin for direct water purification.The conductivity is about 0.06 µm/cm.Suitable for use in non-regenerable cartridges, high efficiency deionisation for silica removal and ultra pure water applications.Packed in 25 litre bagsPolymer matrix: gel polystyrene cross-linked with DVB.Ionic form, as supplied: H+ / OH-Physical shape and appearance: Spherical beadsSphericity: Min. 95%Particle size range (US Standard Screen): 1.25 - 0.315mm, wet.Particle size: +1.2mm < 5% ; -0.3mm < 1%Water retention H+: 45 - 50%Water retention OH-: 53 - 60%Shipping weight (approx.): 700-740 g/lMax. Temp. non-regenerative: 100°CMax. Temp. regenerative: 60°CpH-value range: 0-14Recommended operating conditions:Minimum bed depth should be 0.6m (24")Service flow rate should be 20-60 BV/hourProlonged exposure to strong oxidising agents such as chlorine, hydrogen peroxide and concentrated nitric acid will deteriorate the structural backbone of the resin and should be avoided.Mixture Resin:Anions: 60%Cations: 40%Purchase options:Single purchase - 25 ltr. (item no. 896495)1/2 pallet - 500 ltr. (Art.-No. 896496)1 pallet - 1050 ltr. (art.-no. 896497)
Content: 500 Liter (€5.54* / 1 Liter)
€2,769.00*
2x 1000mm connection hose for stainless steel cartridges, 3/4" Verschr. - 3/4" Bogen mit Verschr.
Product number:
896520
Pressure hose length:
1000mm
Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm
€45.00*
2x 2000mm connection hose for stainless steel cartridges, 3/4" Verschr. - 3/4" Bogen mit Verschr.
Product number:
896522
Pressure hose length:
2000mm
Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm
€70.00*
2x 750mm connection hose for stainless steel cartridges, 3/4" Verschr. - 3/4" Bogen mit Verschr.
Product number:
896519
Pressure hose length:
750mm
Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm
€43.00*
2x1500mm connection hose for stainless steel cartridges, 3/4" Verschr. - 3/4" Bogen mit Verschr.
Product number:
896521
Pressure hose length:
1500mm
Variants:2x Connection hose PE13V34BV340750, pressure hose length 750mm2x Connection hose PE13V34BV341000, pressure hose length 1000mm2x Connection hose PE13V34BV341500, pressure hose length 1500mm2x Connection hose PE13V34BV342000, pressure hose length 2000mm
€58.00*
Tip
CINTROPUR DUO UV2100 3/4″ + 1″
Product number:
896452
Version:
DUO UV 3/4″+1″
Water sterilisation by UV irradiation
The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.
Applications - Origin of the water
Rainwater: UV treatment extends the range of applications and offers increased safety during use
Well water: Avoidance of possible contamination by pathogens
Tap water: UV treatment extends the area of application and increases safety.
Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view.
Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.
Areas of application
General nutrition, bath and shower
Cooking
Large-volume refrigerators
Cold water fountains
Aquarium
Cleaning food
Advantages
Quick and easy installation
Completely physical sterilisation through UV radiation
Natural water treatment without additives and without the risk of chemical overdose
No unpleasant taste or odour
Effective methods for combating microorganisms that cause disease in humans
No toxic by-products
Low maintenance
€585.30*
Tip
CINTROPUR TRIO UV2100 3/4″ + 1″
Product number:
896453
Version:
TRIO UV 3/4″ + 1″ (25W)
Water sterilisation by UV irradiation
The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.
Applications - Origin of the water
Rainwater: UV treatment extends the range of applications and offers increased safety during use
Well water: Avoidance of possible contamination by pathogens
Tap water: UV treatment extends the area of application and increases safety.
Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view.
Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.
Areas of application
General nutrition, bath and shower
Cooking
Large-volume refrigerators
Cold water fountains
Aquarium
Cleaning food
Advantages
Quick and easy installation
Completely physical sterilisation through UV radiation
Natural water treatment without additives and without the risk of chemical overdose
No unpleasant taste or odour
Effective methods for combating microorganisms that cause disease in humans
No toxic by-products
Low maintenance
€558.70*
Tip
CINTROPUR TRIO UV4100 3/4″ + 1″
Product number:
896454
Version:
TRIO UV 3/4″ + 1″ (40W)
Water sterilisation by UV irradiation
The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.
Applications - Origin of the water
Rainwater: UV treatment extends the range of applications and offers increased safety during use
Well water: Avoidance of possible contamination by pathogens
Tap water: UV treatment extends the area of application and increases safety.
Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view.
Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.
Areas of application
General nutrition, bath and shower
Cooking
Large-volume refrigerators
Cold water fountains
Aquarium
Cleaning food
Advantages
Quick and easy installation
Completely physical sterilisation through UV radiation
Natural water treatment without additives and without the risk of chemical overdose
No unpleasant taste or odour
Effective methods for combating microorganisms that cause disease in humans
No toxic by-products
Low maintenance
€553.80*
CINTROPUR UV lamp 40W
Product number:
896456
Version:
40W
Product description: UV lamp 25W / 40W for Cintropur UV2100 / UV4100 flow-through fitting.
The 25W / 40W UV lamp is an essential accessory for the Cintorpur UV2100 / UV4100 flow-through fitting, ensuring maximum efficiency and safety when disinfecting water. With its powerful 25 / 40 watt output, this lamp ensures reliable and thorough disinfection of the water.
Outstanding features:
Annual replacement required: To ensure constant and effective disinfection of the water, it is mandatory to replace the UV lamp once a year. This ensures that the lamp always provides optimum performance and ensures reliable disinfection.
Continuous operation around the clock: The UV lamp is designed to operate 24 hours a day, 7 days a week. This continuous use enables constant sterilisation of the water, which is particularly important in environments with high hygiene requirements, such as companies, clinics or farms.
Protection from moisture and fingerprints: To ensure the longevity and efficiency of the lamp, it is essential to protect it from moisture and fingerprints. This can be achieved by proper installation in the UV2100 / UV4100 flow-through fitting as well as regular cleaning and maintenance.
Effective disinfection through UV technology: UV light is known for its effectiveness in killing bacteria, viruses and other micro-organisms in water. The UV lamp utilises this technology to ensure thorough, reliable disinfection of the water and provide os with a safe water supply.
UV lamp 25W: Insert for UV2100 and TRIO UV 25W
UV lamp 40W: Insert for UV4100, DUO-UV and TRIO-UV 40W
€89.30*
CINTROPUR UV-lamp 25W
Product number:
896455
Version:
25W
Product description: UV lamp 25W / 40W for Cintropur UV2100 / UV4100 flow-through fitting.
The 25W / 40W UV lamp is an essential accessory for the Cintorpur UV2100 / UV4100 flow-through fitting, ensuring maximum efficiency and safety when disinfecting water. With its powerful 25 / 40 watt output, this lamp ensures reliable and thorough disinfection of the water.
Outstanding features:
Annual replacement required: To ensure constant and effective disinfection of the water, it is mandatory to replace the UV lamp once a year. This ensures that the lamp always provides optimum performance and ensures reliable disinfection.
Continuous operation around the clock: The UV lamp is designed to operate 24 hours a day, 7 days a week. This continuous use enables constant sterilisation of the water, which is particularly important in environments with high hygiene requirements, such as companies, clinics or farms.
Protection from moisture and fingerprints: To ensure the longevity and efficiency of the lamp, it is essential to protect it from moisture and fingerprints. This can be achieved by proper installation in the UV2100 / UV4100 flow-through fitting as well as regular cleaning and maintenance.
Effective disinfection through UV technology: UV light is known for its effectiveness in killing bacteria, viruses and other micro-organisms in water. The UV lamp utilises this technology to ensure thorough, reliable disinfection of the water and provide os with a safe water supply.
UV lamp 25W: Insert for UV2100 and TRIO UV 25W
UV lamp 40W: Insert for UV4100, DUO-UV and TRIO-UV 40W
€73.20*
Tip
CINTROPUR UV2100 3/4″ + 1″
Product number:
896450
Version:
UV 2100 3/4″+1″
Water sterilisation by UV irradiation
The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.
Applications - Origin of the water
Rainwater: UV treatment extends the range of applications and offers increased safety during use
Well water: Avoidance of possible contamination by pathogens
Tap water: UV treatment extends the area of application and increases safety.
Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view.
Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.
Areas of application
General nutrition, bath and shower
Cooking
Large-volume refrigerators
Cold water fountains
Aquarium
Cleaning food
Advantages
Quick and easy installation
Completely physical sterilisation through UV radiation
Natural water treatment without additives and without the risk of chemical overdose
No unpleasant taste or odour
Effective methods for combating microorganisms that cause disease in humans
No toxic by-products
Low maintenance
€385.00*
Tip
CINTROPUR UV4100 3/4″ + 1″
Product number:
896451
Version:
UV 4100 3/4″+1″
Water sterilisation by UV irradiation
The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.
Applications - Origin of the water
Rainwater: UV treatment extends the range of applications and offers increased safety during use
Well water: Avoidance of possible contamination by pathogens
Tap water: UV treatment extends the area of application and increases safety.
Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view.
Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.
Areas of application
General nutrition, bath and shower
Cooking
Large-volume refrigerators
Cold water fountains
Aquarium
Cleaning food
Advantages
Quick and easy installation
Completely physical sterilisation through UV radiation
Natural water treatment without additives and without the risk of chemical overdose
No unpleasant taste or odour
Effective methods for combating microorganisms that cause disease in humans
No toxic by-products
Low maintenance
€420.90*
MB A6K4 "disposable quality" mixed bed resin (no VOC)
Product number:
896495
Packaging unit:
Bag (25 litres)
MB A6K4 is a high capacity mixed bed ion exchange resin consisting of a mixture of strongly basic anion resin and a strongly acidic cation resin for direct water purification.The conductivity is about 0.06 µm/cm.Suitable for use in non-regenerable cartridges, high efficiency deionisation for silica removal and ultra pure water applications.Packed in 25 litre bagsPolymer matrix: gel polystyrene cross-linked with DVB.Ionic form, as supplied: H+ / OH-Physical shape and appearance: Spherical beadsSphericity: Min. 95%Particle size range (US Standard Screen): 1.25 - 0.315mm, wet.Particle size: +1.2mm < 5% ; -0.3mm < 1%Water retention H+: 45 - 50%Water retention OH-: 53 - 60%Shipping weight (approx.): 700-740 g/lMax. Temp. non-regenerative: 100°CMax. Temp. regenerative: 60°CpH-value range: 0-14Recommended operating conditions:Minimum bed depth should be 0.6m (24")Service flow rate should be 20-60 BV/hourProlonged exposure to strong oxidising agents such as chlorine, hydrogen peroxide and concentrated nitric acid will deteriorate the structural backbone of the resin and should be avoided.Mixture Resin:Anions: 60%Cations: 40%Purchase options:Single purchase - 25 ltr. (item no. 896495)1/2 pallet - 500 ltr. (Art.-No. 896496)1 pallet - 1050 ltr. (art.-no. 896497)
Content: 25 Liter (€7.10* / 1 Liter)
€177.40*
Tip
N-LF420 0-2µS conductivity meter with 4-20mA output, LED display and 3/4 inch screw-in thread
Product number:
880683
High-quality conductivity meter for conductivity monitoring
Our innovative conductivity meter has been specially developed for monitoring conductivity in ultrapure water (demineralised water) and has a 4-20 mA signal output that enables easy integration into higher-level control systems.The measurements are temperature-compensated, which ensures greater accuracy. With a measuring range of 0 to 2 µS/cm, our device is particularly suitable for monitoring low conductivities, such as those typically found in mixed-bed ion exchanger cartridges. The limit value is displayed by means of 2 LEDs (green/red) on the top of the device. An acrylic glass cover ensures that the current status is immediately visible.
The device has a ¾ screw thread, which can be customised for easy and safe installation. There is also the option of customisation in terms of the LEDs, including the measuring range and a private label.
Our high-quality conductivity meter offers a reliable solution for conductivity monitoring in medical areas to fulfil the guidelines and recommendations of the DGSV.
Our measuring device is also particularly suitable for mixed bed cartridge monitoring in the clinical environment.
Standard LED configuration (1 green LED, 1 red LED):
<0.5 µS/cm = green
>0.5 µS/cm to <1.0 µS/cm = green/red flashing
>1 µS/cm = red
€229.20*
Tip
N-LF5R, 0-5 µS conductivity measuring instrument with integrated 3/4" screw-in measuring cell
Product number:
851075
measuring range:
0-5 μS/cm
|
potential-free relay contact:
with
Conductivity meter for conductivity monitoring
Our innovative conductivity meter was developed specifically for monitoring the conductivity of aqueous solutions. With a measuring range of 0 to 5 µS/cm, our device is particularly suitable for monitoring low conductivities, which are typically used in the following processes:
Mixed bed cartridges
demineralisation
Reverse osmosis (2-stage)
EDI (electrode ionisation)
The limit values are indicated by means of digital displays with 2 preset limit values and 2 LEDs (green/red) for visualisation.
The device has a screw-in thread of ¾", which can be customised for easy and safe installation. There is also the option of customised versions with regard to the measuring range and a private label.
Added value
Operation at 9 V DC via supplied plug-in power supply unit
1 potential-free relay with switchable mode of operation of relay control
Limit value display optically by means of LEDs
€293.75*
Tip
NeoTecMaster® - 5 inch in IP 66 housing as a 4-channel system, preconfigured to accept up to 8 incoming 4-20 mA signals, one R232 signal and Modbus signal, can be optionally enabled for 8 channels
Product number:
851096
Our 4- or 8- channel system allows the processing of up to four or eight measurement signals. For this purpose, 4-20 mA/ RS232 as well as Modbus RTU are available as signal inputs. Based on the received data a visualization as well as a trend display takes place. Through modular addition of optional modules (slaves) the realization of popular control concepts is possible.Advantages:Simple operation
Integration of the Testomat® device world
Integration into the existing control cabinet, alternatively we offer our NeoTecMaster® housingModular function range expandable by NeoTec slave modules (measure, control, control)Available as installation variant or structure variant
Contents:
NeoTecMaster® 5 inch - 4 channel system (optionally expandable to 8 channels) with Modbus interface and RS232 input for data communicationNeoTec Slave 4-20mA module (inputs: 8x 20mA)NeoTecMaster® IP66 housing for 5" display, light grey with front foilUSB stick for NeoTecMaster® 8GBInstallation of NeoTecMaster® in housing incl. parameterisation and cabling of the NeoTecMaster®Universal power supply 24V/6A DC (100-240V AC) (144 Watt)
€2,228.10*
Pyrogen filter - water treatment plant for outpatient clinics
Product number:
896957
Pyrogen filterA pyrogen filter is a special type of filter used in water treatment to remove pyrogens from the water. Pyrogens are substances that can cause an immunological reaction in the body, in particular an increase in body temperature. As a rule, these are endotoxins that are released by bacteria such as Escherichia coli (E. coli). The pyrogen filter consists of a filter element that has a very fine pore size, typically in the range of 0.1 to 0.2 micrometres. This allows the filter to effectively retain particles and microorganisms, including pyrogenic bacteria that may be present in the water. In the modular water treatment system, the pyrogen filter is used after other pre-treatment stages such as filtration and disinfection. After the water has been cleaned of particles and microorganisms, it is passed through the pyrogen filter to remove any pyrogens. Pyrogen filters are particularly important in industries where the absence of pyrogens in the water is crucial, for example in the ambulatory care sector to ensure the optimum quality of instruments for operations. Overall, pyrogen filters play an important role in water treatment to ensure the quality and purity of water and minimise potential exposure to pyrogenic substances.
€269.30*
Salt tablets (10kg), EN 973 A
Product number:
896467
Packaging unit:
Bag (10 kilogram)
Proposed use: for the regeneration of water softeners
Composition: evaporated salt (min. 99.9% NaCl)
Dimensions / weight of tablet: ø25mm / 14g
Moisture content: < 0.08
Filling weight: 10kg per sack
Type of packaging: PE film
Storage description: store dry and well closed
Certifications: ISO 9001, ISO 14001 and IFS
Standard: The product complies with the following standards.
EN 973:2009
Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A
EN 16401:2013
Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A
EN 14805:2022
Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1
EN 16370:2022
Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2
Purchase options:
Single purchase: 1x 10kg sack (Art.-No. 896467)
Pallet purchase: 100x 10kg sacks (Art.-No. 896498)
€23.00*
Salt tablets (25kg), EN 973 A
Product number:
896468
Packaging unit:
Bag (25 kilogram)
Proposed use: for the regeneration of water softeners
Composition: evaporated salt (min. 99.9% NaCl)
Dimensions / weight of tablet: ø25mm / 14g
Moisture content: < 0.08
Filling weight: 25kg per sack
Type of packaging: PE film
Storage description: store dry and well closed
Certifications: ISO 9001, ISO 14001 and IFS
Standard: The product complies with the following standards...
EN 973:2009
Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A
EN 16401:2013
Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A
EN 14805:2022
Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1
EN 16370:2022
Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2
Purchase options:
Single purchase: 1x 25kg sack (Art.-No. 896468)
Pallet purchase: 40x 25kg sacks - 1000 kg (Art.-No. 896500)
€25.00*
Testomat 2000®
Product number:
100095
Language in the display:
German
|
Performance/execution:
230 V/50-60 HZ
The process photometer Testomat 2000® automatically determines water hardness, carbonate hardness, the p-value or the minus m-value via titration. It is ideal for monitoring the water quality of water treatment, water blending and drinking-water plants. Monitoring and quality control of softening plants with and without blending (Testomat 2000® reagent TH 2005–2250)Monitoring and quality control of decarbonisation plants (Testomat 2000® reagent TC 2050–2100) Measuring acidic values in decarbonisation and desalination plants (Testomat 2000® reagent TM 2005) Monitoring of steam boilers (Testomat 2000® reagent TP 2100).Performance profile:
Menu-driven operation and programming via plain text display
Determinal measuring ranges of residual hardness, total hardness, carbonate hardness, minus m value, p value by indicator selectionSelection of hardness units in ° dH, ° f, ppm CaCO3 or mmol / l
High-precision titration using a piston dosing pump
Analysis initiation:
- Automatic interval operation (Interval pause adjustable from 0–99 min)
- External control
- Dynamic (fatigue-dependent interval operation)
- Quantity dependent via contact water meter
Two independent limits with hysteresis (1, 2 oder 3 bad analyzes) and adjustable switching functionsMonitoring of two measuring points (Switching by external solenoid valves)Internal error documentation
Programmable service address
Indicator quantities: 100 and 500 ml bottles
Programmable maintenance interval for maintenance request
€6,757.20*
Testomat® 808
Product number:
100650
Operating pressure:
1 - 4 bar
|
Performance/execution:
230 V/50-60 HZ
The Testomat® 808 is a compact analyzer for the online measurement of water hardness according to the principle of " limit value monitoring by color change ". The Testomat® style="letter-spacing: 0px;"> 808 is a combination of the latest technologies based upon decades of international Testomat® experience.Applications of continuous residual hardness monitoring are for example:
Reverse osmosis plants
Boiler feed water supply
Soft water for commercial puposes
Pure water systems
Performance profile:Limit value indication (not exceeded or exceeded: green / red LED)
Modern indicator pump system
Automatic measuring process with low water consumption
Direct error and indicator quantity indication
Internal and external flushing of the measuring chamber by manual control
Control of an external rinsing valve
Three potential-free relays for:
External rinsing valve control
Limit value evaluation
External control and / or alarm processing
Safety check for 72 hours operation without supervision
Indicator quantities: 100 and 500 ml bottles
4 - 20 mA interface for defined status and error messages
RS 232 interface for firmware updates
€2,909.40*