The pyrogen filtration system for producing pyrogen-free water using the mixed-bed process offers an impressive combination of a 5 µm pre-filter and a high-precision 0.05 µm filter for the reliable removal of pyrogens – ideal for pharmaceutical, medical and analytical applications. The design, which can be installed directly at the outlet of the mixed-bed system and is resistant to deionised water, ensures long-lasting, safe operation and, thanks to efficient pre-filtration, provides reliable protection against premature wear. Buy the filter system online now and benefit from maximum process reliability – including clear maintenance recommendations for consistently high water quality. The pyrogen filter system is supplied with all necessary installation materials, such as pressure hoses and fittings for the booster pump. The filter system is designed to produce pyrogen-free water. To protect the pyrogen filter, a sediment filter (filter rating: 5 micrometres) is fitted upstream of it. The pyrogen filter has a filter rating of 0.05 micrometres. The system is installed directly at the outlet of the mixed-bed system and, thanks to its components that are resistant to deionised water, is ideally suited for long-term use. Pre-filter (sediment filter) The sediment filter acts as a pre-filtration stage and protects the downstream pyrogen filter from resin abrasion from the mixed-bed cartridge, thereby preventing premature wear. Pressure booster pump: The pressure booster pump included in the package is connected upstream of the mixing bed to compensate for pressure loss caused by the mixing bed and the filtration elements for the downstream components, and to ensure an optimal supply of deionised water to the connected equipment. Pyrogen filter The pyrogen filter in its stainless steel housing provides a fine filtration stage and is designed to remove pyrogens (e.g. endotoxins), which are of particular critical importance in pharmaceutical, medical and analytical applications. Maintenance recommendation The filters should be inspected after three months and replaced after six months at the latest to ensure a safe process. For continuous operation, it is recommended to keep one sediment filter element (item number: 882088) and one pyrogen filter element (item number: 896493) in stock at all times. Note: Should failures occur in the connected downstream equipment during operation, the filter elements must be checked immediately and replaced if necessary. Deposits on the filter surface can lead to blockage of the filter elements. Frequently Asked Questions What is the pyrogen filter system used for? It produces exceptionally pure, pyrogen-free water following the mixed-bed system. How is the filter system constructed? It combines a 5 µm pre-filter with a 0.05 µm fine filter. Which substances are reliably removed? Primarily pyrogens such as endotoxins, as well as coarse particles and impurities. Pre-filter (sediment filter) The sediment filter acts as a pre-filtration stage and protects the downstream pyrogen filter from resin abrasion from the mixed-bed cartridge, thereby preventing premature wear. Pyrogen filter The pyrogen filter in a stainless steel housing acts as a fine filtration stage and serves to remove pyrogens (e.g. endotoxins), which are particularly critical in pharmaceutical, medical and analytical applications. Where is the system installed? Directly at the outlet of the mixed-bed system. What role does the booster pump play? It ensures stable pressure and a consistent water supply to the equipment. How often do the filters need to be changed? Check after three months and replace after six months at the latest. What happens in the event of a sudden drop in performance? The filters should be checked immediately and replaced if necessary.

M22 female quick coupling adapter (internal thread), with water stop for the terminal water filters for taps. Adapter for taps with an internal M22 male thread on the water outlet. This adapter is suitable for taps that have a spout with an M22 external thread that is offset inwards. It serves as an extension and moves the thread to the outside so that it is easily accessible and the water filter for taps can be connected without any problems.

Quick coupling adapter M24 AG (male thread), with water stop for the terminal water filters for taps. Adapter for connecting a water filter. Adapter for taps with an M24 female thread on the water outlet. This adapter is suitable for taps that have an outlet with a 24 female thread. This means that our water filters for taps can be easily attached to the tap.

The ring spanner is used to open the housing of the pyrogen filter line so that the filter element can be replaced. The ring spanner is used for safely opening and closing the housing. It enables easy and reliable handling during maintenance, especially when changing filters. Its precise shape ensures optimal torque transfer and prevents damage to the housing. Using the ring spanner ensures a quick and efficient filter change, contributing to the maintenance of the system’s flawless operation.

Proposed use: for the regeneration of water softeners Composition: evaporated salt (min. 99.9% NaCl) Dimensions / weight of tablet: ø25mm / 14g Moisture content: < 0.08 Filling weight: 10kg per sack Type of packaging: PE film Storage description: store dry and well closed Certifications: ISO 9001, ISO 14001 and IFS Standard: The product complies with the following standards. EN 973:2009 Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A EN 16401:2013 Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A EN 14805:2022 Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1 EN 16370:2022 Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2 Purchase options: Single purchase: 1x 10kg sack (Art.-No. 896467) Pallet purchase: 100x 10kg sacks (Art.-No. 896498) Frequently Asked Questions What are the salt tablets used for? To regenerate water softening systems whilst they are in operation. What is the quality of the salt? It consists of high-purity evaporated salt containing at least 99.9% sodium chloride. In what packaging is it supplied? In a handy 10 kg bag made of PE film. How should the product be stored? In a dry place and kept tightly sealed. Which standards does the salt meet? It complies with several EN standards for water treatment and chlorine generation. What certifications are available? ISO 9001, ISO 14001 and IFS for tested quality and safety. What applications is the product suitable for? For water softening as well as technical and hygiene-sensitive applications. What is the advantage of the 10 kg pack? It is easy to handle and ideal for smaller consumption volumes.

Proposed use: for the regeneration of water softeners Composition: evaporated salt (min. 99.9% NaCl) Dimensions / weight of tablet: ø25mm / 14g Moisture content: < 0.08 Filling weight: 25kg per sack Type of packaging: PE film Storage description: store dry and well closed Certifications: ISO 9001, ISO 14001 and IFS Standard: The product complies with the following standards... EN 973:2009 Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A EN 16401:2013 Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A EN 14805:2022 Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1 EN 16370:2022 Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2 Purchase options: Single purchase: 1x 25kg sack (Art.-No. 896468) Pallet purchase: 40x 25kg sacks - 1000 kg (Art.-No. 896500) Frequently Asked Questions What are the salt tablets used for? For regenerating water softening systems. What exactly is the quality of the salt? It consists of high-purity evaporated salt containing at least 99.9% sodium chloride. In what packaging is the product supplied? In 25 kg bags made of protective PE film. How should the salt be stored? In a dry place and kept tightly sealed. Which standards does the product meet? It complies with several EN standards for water treatment and chlorine generation. What certifications are available? ISO 9001, ISO 14001 and IFS for verified quality and safety. For which applications is this salt suitable? For water softeners and technical water treatment systems. What distinguishes this variant from larger containers? It is designed as a more manageable unit for more flexible use.

The sediment filter element for the Neomeris pyrogen filter system is a high-performance pre-filter that reliably removes coarse contaminants such as sand, rust, dust, and resin abrasion. This significantly increases the efficiency and service life of downstream filter systems. As an essential first stage of filtration, it protects the pyrogen filter from wear, ensures consistently high water quality, and is particularly suitable for applications where clean, treated water is crucial. Buy online now and benefit from easy installation, high compatibility (with item no. 882087), and straightforward, regular replacement for consistently optimal filtration. The sediment filter element is a key component of the Neomeris pyrogen filtration system and acts as the first stage of protection in the multi-stage filtration process. It is designed to reliably remove coarse contaminants in order to improve the service life and efficiency of the subsequent filtration stage. What is the sediment filter element used for? Function and performance The sediment filter acts as a pre-filter and protects the downstream pyrogen filter from resin abrasion from the mixed-bed cartridge and from premature wear. With its coarse micron rating, the sediment filter element reliably retains sand, dust, rust particles, resin abrasion, and similar contaminants. This first filtration stage is crucial as it prevents larger dirt particles from damaging or impairing the finer filter elements in the subsequent stages. Product benefits: Reliable sediment pre-filter for the Neomeris pyrogen filtration system Efficient first filtration stage: Removes coarse particles such as sand, dust, rust, resin abrasion from the mixed-bed cartridge, etc. Regular replacement required: Ensures consistent water quality and protects the system Easy integration: Can be easily integrated into the Neomeris pyrogen filter system Maintenance and replacement To ensure optimum performance and the best possible water quality, it is important to replace the sediment filter element regularly. The filters should be checked after three months and replaced after six months at the latest to ensure safe operation. Compatibility and installation The sediment filter element is suitable for replacement in the Neomeris pyrogen filter line (item number: 882087). Changing the filter is simple and can be carried out without specialist knowledge, thereby reducing maintenance requirements and improving user-friendliness. Frequently Asked Questions What is the role of the sediment filter element in the system? It removes coarse particles before the water undergoes further purification. Why is this pre-filter so important? It protects the downstream filters from premature wear. What substances does the element filter out of the water? Sand, rust, dust and fine particles such as resin abrasion. How often should the filter be replaced? At least every six months, to ensure water quality. Is replacement complicated? No, replacement is simple and requires no specialist knowledge. Which system is the filter compatible with? With the Neomeris pyrogen filter system (item no. 882087). How does the filter improve the overall system? This first filtration stage is crucial, as it prevents larger particles of dirt from damaging or impairing the finer filter elements in the subsequent stages. This increases the service life and stability of the entire filter system.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Service set contains:2 x sight glasses 30 x 33 x flat gasket 24 x 21 x insert for screw cap & suction tube 100 ml bottle1 x insert for screw cap & suction tube 500 ml bottle1 x double pump head conversion kit1 x gear motor2 x Hose connector1 x Cleaning brush set Important: After replacement, the pump must be recalibrated in Testomat® 808 SiO2.The adjustment is available from firmware version T808_83-003. Carry out a firmware update for older versions before performing the adjustment! (Serial number less than 253.061)For this calibration, it is important that you use water with a silicate content of 0 ppm, otherwise the zero point calibration will be incorrect and lead to false measurement results.To ensure this, please use the silicate filter cartridge specially developed for this process for the T808 SiO2, article 270344.(For additional information and instructions on the equipment you need for the software update, please refer to the operating instructions. The instructions "Replacing the pump head on Testomat® 808 SiO2" are also available) Frequently Asked Questions What is the Professional Service Kit for? For comprehensive maintenance of your Testomat® 808 SiO₂ after prolonged use. When should I use this service kit? Recommended after approximately two years, or sooner if the unit is used intensively. What is included in the Service Set? Essential spare parts such as the motor, pump components, seals and accessories. What is the difference between this and the Annual Service Set? This set contains additional parts for more extensive maintenance. Is there anything to bear in mind after replacement? Yes, the pump must be recalibrated afterwards. Why is it important to recalibrate the pump? To ensure that the readings remain accurate and reliable. What do I need to bear in mind when recalibrating? Silicate-free water should be used to avoid errors.

Dear customers, please note that the calibration of the Testomat® 808 SiO2 can only be carried out with silicate-free water. Therefore, please use the silicate filter cartridge specially developed for this purpose when replacing the double pump head (art. no. 40395) and the associated pump adjustment.The cartridge filled with the special resin is inserted into the sampling line of the unit before the inlet and removed again after the adjustment. The pump replacement instructions describe the use of the silicate filter, storage conditions and shelf life. After the first use, the filter can be used up to 10 times within one year for balancing. After one year, the filter must be disposed of. Frequently asked questions What do I need the silica filter cartridge for? The silicate filter is intended for the calibration of the Testomat® 808 SiO₂ after the pump head change. When is the cartridge inserted? During the exchange of the pump head and during the device calibration. Why is the cartridge necessary? It removes silicate from the water and prevents false measurement results. Where is the cartridge installed? Before entering the sampling line of the device. Can I reuse the cartridge? Yes, it can be used for multiple comparisons. The filter can be used up to ten times within a year for calibration after the first use (applies to SiO₂ concentrations of up to 1 mg/l. At higher concentrations, the usability of the filter is correspondingly reduced). The filter must be disposed of after one year. Do I have to have the cartridge permanently installed? No, it is only used for the comparison and then removed again. What should I consider when using it? Please read the operating instructions "Replacing the pump head on the Testomat® 808 SiO₂" carefully.

Testomat 2000 – Online Analysis Device for Water Hardness and Other Parameters Continuous water quality monitoring with automatic titration and flexible parameter selection The Testomat 2000 is a versatile analysis device for the continuous determination of key water quality parameters such as water hardness, carbonate hardness, p-value, and minus m-value. The process photometer operates fully automatically with a precise piston dosing pump and plain-text menu display, allowing measurement, analysis, and control without manual intervention. Individually selectable indicators enable different parameters and measurement ranges, while internal limit contacts ensure reliable monitoring and alarm functions. Depending on the selected indicator, the device measures residual hardness, total hardness, carbonate hardness, p-value, or minus m-value fully automatically via precise titration. Two independently programmable limit contacts support automatic control and alarm functions, while external control options such as range-dependent measurement triggering or versions with SD card data logger are available for documentation and process analysis. What functions does the Testomat 2000 from Heyl offer? It combines modern measurement principles with practical control and evaluation functions. By selecting different indicator types, it can be used in a wide variety of applications. Two freely programmable limit values with adjustable hysteresis support monitoring tasks, and optional interfaces expand the device for complete data recording or integration with control systems. Applications for the Testomat 2000 Hardness Monitoring water quality in water treatment, blending, and drinking water systems Monitoring and quality control of softening systems with or without blending Monitoring and quality assurance of decarbonization systems Prevention of acid intrusion in decarbonization systems Boiler monitoring of steam boilers Performance Profile of the Testomat 2000 Simple, menu-guided operation and programming via plain-text display Measurement of residual hardness, total hardness, carbonate hardness, minus m-value, or p-value selectable via indicator choice Free choice of hardness units: °dH, °f, ppm CaCO3, or mmol/l High measurement accuracy due to precise piston dosing pump Analysis triggering: Automatic interval operation (interval pause adjustable from 0–99 minutes) External triggering Dynamic (exhaustion-dependent interval operation) Quantity-dependent via contact water meter Two independent limit values with hysteresis (1, 2, or 3 bad analyses) and adjustable switching functions Monitoring of two measuring points (switching via external solenoid valves) Internal error documentation Programmable service address Indicator volumes: 100 and 500 ml bottles Programmable maintenance interval for maintenance requests Frequently asked questions What parameters can the Testomat 2000® measure? Measurement parameters: water hardness, carbonate hardness, p-value and minus m-value How flexible is the device with different requirements? Very flexible due to the free choice of hardness units in °dH, °f, ppm CaCO3 or mmol/l. Does the device also take over control tasks? Yes, it can monitor processes and react automatically. Do I have to start measurements manually? No, the device works automatically or as needed. Is the device suitable for complex systems? Yes, it can be integrated into various systems in a versatile way. How does the device support process safety? Through continuous monitoring and automatic alarms. Does the device need to be constantly supervised? No, the Testomat 2000® is designed for unattended operation (BOB function).