The pre-filter section is a filter unit consisting of a pre-filter with backwash and an activated carbon filter. It was developed for use in regions with poor water quality. Its main purpose is to protect downstream softening and osmosis systems that could be damaged by impurities in the water. Pre-filter with backwash: This filter mechanism removes coarse dirt particles and impurities from the water. The backwash technology allows the filter to be cleaned regularly, ensuring a long service life and constant performance. Activated carbon filter: The activated carbon filter removes chemical impurities, chlorine and unpleasant odours that are often found in drinking water. This additionally purifies the water and improves its quality. This pre-filter section efficiently protects your downstream systems by removing coarse particles, organic substances and chemicals. The pre-filter section is available in three different versions. Basic version Standard version Advanced version 882026 Standard version Pre-filtration consisting of an automatically operating backwash filter (backwash interval programmable) and downstream activated carbon filter.

The pressure booster line for under-sink systems has the task of providing the required amount of water at sufficient pressure for the connected consumers. These consumers include container washing systems, cleaning and disinfection devices and sterilisers. Boosting the pressure ensures that these devices are constantly supplied with the required amount of water, while at the same time optimising the pressure ratios to meet the demand. Another important aspect of the pressure booster line is the circulation of the treated water. If no demineralised water is withdrawn by the appliances, the treated water is returned from the tank and fed to the mixing bed. This continuous circulation prevents contamination of the demineralised water, as it is always in motion and cannot stagnate. This means that the high water quality is always guaranteed. The standard version of the pressure booster station consists of a 100 litre round tank with a water lock and a sterile filter. Replenishment of the demineralised water is ensured by an integrated fill level sensor. If the fill level falls below the defined minimum fill level, demineralised water production starts automatically and is stopped when the set maximum fill level is reached. Larger tank volumes are available on request.

The pressure booster line for under-sink systems has the task of providing the required amount of water at sufficient pressure for the connected consumers. These consumers include container washing systems, cleaning and disinfection devices and sterilisers. Boosting the pressure ensures that these devices are constantly supplied with the required water, while at the same time optimising the pressure ratios to meet the demand. Another important aspect of the pressure booster line is the circulation of the treated water. If no demineralised water is withdrawn by the appliances, the treated water is returned from the tank and fed to the mixing bed. This continuous circulation prevents contamination of the demineralised water, as it is always in motion and cannot stagnate. This means that the high water quality is always guaranteed. The standard version of the pressure booster station consists of a 60 litre round tank with a water lock and a sterile filter. Replenishment of the demineralised water is ensured by an integrated fill level sensor. If the fill level falls below the defined minimum fill level, demineralised water production starts automatically and is stopped when the set maximum fill level is reached. Larger tank volumes are available on request.

Pyrogen filter A pyrogen filter is a special type of filter used in water treatment to remove pyrogens from the water. Pyrogens are substances that can cause an immunological reaction in the body, in particular an increase in body temperature. These are usually endotoxins released by bacteria such as Escherichia coli (E. coli). The pyrogen filter consists of a filter element with a very fine pore size and an associated filter housing. The pyrogen filter is available with filter elements of 0.05, 0.1 or 0.2 micrometres, which you can select as required. This enables the filter to effectively retain particles and microorganisms, including pyrogenic bacteria that may be present in the water. In the modular water treatment plant, the pyrogen filter is used after other pre-treatment stages such as filtration and disinfection. After the water has been purified of particles and microorganisms, it is passed through a pyrogen filter to remove any pyrogens. Pyrogen filters are particularly important in industries where pyrogen-free water is crucial, such as in outpatient care, to ensure the optimal quality of surgical instruments. Overall, pyrogen filters play an important role in water treatment to ensure the quality and purity of the water and minimise potential exposure to pyrogenic substances.

The pyrogen filtration system for producing pyrogen-free water using the mixed-bed process offers an impressive combination of a 5 µm pre-filter and a high-precision 0.05 µm filter for the reliable removal of pyrogens – ideal for pharmaceutical, medical and analytical applications. The design, which can be installed directly at the outlet of the mixed-bed system and is resistant to deionised water, ensures long-lasting, safe operation and, thanks to efficient pre-filtration, provides reliable protection against premature wear. Buy the filter system online now and benefit from maximum process reliability – including clear maintenance recommendations for consistently high water quality. The pyrogen filter system is supplied with all necessary installation materials, such as pressure hoses and fittings for the booster pump. The filter system is designed to produce pyrogen-free water. To protect the pyrogen filter, a sediment filter (filter rating: 5 micrometres) is fitted upstream of it. The pyrogen filter has a filter rating of 0.05 micrometres. The system is installed directly at the outlet of the mixed-bed system and, thanks to its components that are resistant to deionised water, is ideally suited for long-term use. Pre-filter (sediment filter) The sediment filter acts as a pre-filtration stage and protects the downstream pyrogen filter from resin abrasion from the mixed-bed cartridge, thereby preventing premature wear. Pressure booster pump: The pressure booster pump included in the package is connected upstream of the mixing bed to compensate for pressure loss caused by the mixing bed and the filtration elements for the downstream components, and to ensure an optimal supply of deionised water to the connected equipment. Pyrogen filter The pyrogen filter in its stainless steel housing provides a fine filtration stage and is designed to remove pyrogens (e.g. endotoxins), which are of particular critical importance in pharmaceutical, medical and analytical applications. Maintenance recommendation The filters should be inspected after three months and replaced after six months at the latest to ensure a safe process. For continuous operation, it is recommended to keep one sediment filter element (item number: 882088) and one pyrogen filter element (item number: 896493) in stock at all times. Note: Should failures occur in the connected downstream equipment during operation, the filter elements must be checked immediately and replaced if necessary. Deposits on the filter surface can lead to blockage of the filter elements.

M22 female quick coupling adapter (internal thread), with water stop for the terminal water filters for taps. Adapter for taps with an internal M22 male thread on the water outlet. This adapter is suitable for taps that have a spout with an M22 external thread that is offset inwards. It serves as an extension and moves the thread to the outside so that it is easily accessible and the water filter for taps can be connected without any problems.

Quick coupling adapter M24 AG (male thread), with water stop for the terminal water filters for taps. Adapter for connecting a water filter. Adapter for taps with an M24 female thread on the water outlet. This adapter is suitable for taps that have an outlet with a 24 female thread. This means that our water filters for taps can be easily attached to the tap.

The ring spanner is used to open the housing of the pyrogen filter line so that the filter element can be replaced. The ring spanner is used for safely opening and closing the housing. It enables easy and reliable handling during maintenance, especially when changing filters. Its precise shape ensures optimal torque transfer and prevents damage to the housing. Using the ring spanner ensures a quick and efficient filter change, contributing to the maintenance of the system’s flawless operation.

Proposed use: for the regeneration of water softeners Composition: evaporated salt (min. 99.9% NaCl) Dimensions / weight of tablet: ø25mm / 14g Moisture content: < 0.08 Filling weight: 10kg per sack Type of packaging: PE film Storage description: store dry and well closed Certifications: ISO 9001, ISO 14001 and IFS Standard: The product complies with the following standards. EN 973:2009 Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A EN 16401:2013 Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A EN 14805:2022 Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1 EN 16370:2022 Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2 Purchase options: Single purchase: 1x 10kg sack (Art.-No. 896467) Pallet purchase: 100x 10kg sacks (Art.-No. 896498)

Proposed use: for the regeneration of water softeners Composition: evaporated salt (min. 99.9% NaCl) Dimensions / weight of tablet: ø25mm / 14g Moisture content: < 0.08 Filling weight: 25kg per sack Type of packaging: PE film Storage description: store dry and well closed Certifications: ISO 9001, ISO 14001 and IFS Standard: The product complies with the following standards... EN 973:2009 Products for the treatment of water intended for human consumption - Sodium chloride for regenerating ion exchange resins -Type A EN 16401:2013 Products for the treatment of swimming pool water - Sodium chloride for use in electrochemical chlorine production plants - Type A EN 14805:2022 Products for the treatment of water intended for human consumption - Sodium chloride for on-site electrochemical production of chlorine by membrane-free processes - Type 1 EN 16370:2022 Products for the treatment of water intended for human consumption - Sodium chloride for the on-site electrochemical production of chlorine by means of membrane cells - Quality 2 Purchase options: Single purchase: 1x 25kg sack (Art.-No. 896468) Pallet purchase: 40x 25kg sacks - 1000 kg (Art.-No. 896500)

The sediment filter element for the Neomeris pyrogen filter system is a high-performance pre-filter that reliably removes coarse contaminants such as sand, rust, dust, and resin abrasion. This significantly increases the efficiency and service life of downstream filter systems. As an essential first stage of filtration, it protects the pyrogen filter from wear, ensures consistently high water quality, and is particularly suitable for applications where clean, treated water is crucial. Buy online now and benefit from easy installation, high compatibility (with item no. 882087), and straightforward, regular replacement for consistently optimal filtration. The sediment filter element is a key component of the Neomeris pyrogen filtration system and acts as the first stage of protection in the multi-stage filtration process. It is designed to reliably remove coarse contaminants in order to improve the service life and efficiency of the subsequent filtration stage. What is the sediment filter element used for? Function and performance The sediment filter acts as a pre-filter and protects the downstream pyrogen filter from resin abrasion from the mixed-bed cartridge and from premature wear. With its coarse micron rating, the sediment filter element reliably retains sand, dust, rust particles, resin abrasion, and similar contaminants. This first filtration stage is crucial as it prevents larger dirt particles from damaging or impairing the finer filter elements in the subsequent stages. Product benefits: Reliable sediment pre-filter for the Neomeris pyrogen filtration system Efficient first filtration stage: Removes coarse particles such as sand, dust, rust, resin abrasion from the mixed-bed cartridge, etc. Regular replacement required: Ensures consistent water quality and protects the system Easy integration: Can be easily integrated into the Neomeris pyrogen filter system Maintenance and replacement To ensure optimum performance and the best possible water quality, it is important to replace the sediment filter element regularly. The filters should be checked after three months and replaced after six months at the latest to ensure safe operation. Compatibility and installation The sediment filter element is suitable for replacement in the Neomeris pyrogen filter line (item number: 882087). Changing the filter is simple and can be carried out without specialist knowledge, thereby reducing maintenance requirements and improving user-friendliness.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.

Our Neomeris Select high temperature conductivity cells are suitable in a wide range of high performance applications with high temperatures and pressures.To meet these demanding technical requirements, our sensors are manufactured from 316 stainless steel with PEEK elements and feature a one-piece cell design suitable for high pressure conditions.  The conductivity cells are available with different cell constants (0.1/cm and 1.0/cm) and temperature sensors (PT100 and PT1000) and are designed for a specific pressure-temperature range. Certain model types also allow you to choose between a short and long thread, depending on the installation situation.Our 1/2" inch Select LF stainless steel conductivity cell is a general purpose sensor that can be used in a variety of standard applications such as in cooling towers or water treatment plants, etc. and is easy to install. In contrast, our Select HTLF Ultra high performance conductivity cell is the top of the range model. This conductivity sensor is specially designed for boiler applications where it is permanently integrated in the boiler. Via our selection menu you can easily choose the right conductivity sensor for your application. Please contact us if you have any questions.